-
Sale!Out of stock
Smart L1/L2 16A/30A EV Charging Station, Stand-Alone or Networked Operation
Small and mighty: with a footprint of just 4.5" X 3.5", SmartElek is a fully safety certified EVSE that includes advanced wireless connectivity including OCPP 1.6J for operation with residential and commercial automation systems. Works with our free mobile and web apps with or without a home automation hub. Compatible with SmartThings and Control4. Built-in software for autonomous load balancing operation in EVSE clusters. This item is temporarily out of stock and is expected to become available August 24. -
ZBRE-U - Model # 2012x
Use this range extender to ensure home automation devices reliably communicate with each other. By routing weaker messages, the ZBRE-U boosts the overall coverage of your home control network, ensuring robust communication, and eliminating dead zones. It also helps network expansion by allowing other devices located further from the network controller to join the network. Works with most Zigbee hubs including Smartenit, SmartThings, Hubitat, Tuya, Alexa Echo Plus and Control4 (free diver provided).Please choose the right version below. HA is for common home automation hubs such as Smartenit, SmartThings, Hubitat, etc. SEP 1.x is for HAN (Home Area Network) where the utility smart meter is usually the coordinator/hub.
-
ZBMLCSR - Model # 4040C-xx
Remotely control and monitor your larger energy-consuming appliances and include them in intelligent energy management with a ZBMLCSR wireless load switch. Perfectly suited for pool pump control and electric heater management, the device also lets you see load status and energy consumption. Use with your home automation or IoT control system and set schedules and get alerts about large energy consumers before they drive up your energy bill. This device is available in either a Normally Open (load will remain de-energized in the event of a device failure) or Normally Closed (load will stay energized) configuration. Choose a preferred protocol among Zigbee, WiFi and LoRa. For a dual load version, see our ZBMLC30Smart Possibilities:
- Turn on/ off large devices from anywhere
- Monitor energy consumption at the appliance level
- Let your water heater operate when electricity is at the lowest cost
- Run your pool pump when it's most energy efficient and least costly
- Have large appliances respond to other events in your system
-
Sale!
ZBLIQS- Model # 2030A
Use ZBLIQS to prevent damage from leaking pipes, overflowing condensation pans, leaking water heaters and more. Its two liquid sensors and wireless transmitter offer a reliable way to detect and announce unwanted liquid before damage ensues. As part of a Smartenit automation network, it can be used with alarms, valve controllers, on/off relays, light switches and more. Battery powered, the ZBLIQS can be installed in remote places to effectively monitor any part of your entire property.Smart Possibilities
- Set off an alarm if your AC condensation pan overflows
- Detect leaks from frozen pipes and shut off supply through our ZBVC-1 valve controller
- Shut off electrical equipment if water is detected nearby
- Turn on floodlamps in your basement to illuminate leak sites
-
ZBMS3-1 - Model # 1019D
Your home control system becomes more intelligent the more data from the real world you can feed it. ZBMS3-1 really smartens up your system by providing information on motion, temperature, and ambient light that can then be used to influence other devices. Easily trigger devices such as lights or alarms based on motion, with this perfect addition to your monitoring or energy management system.Smart Possibilities:
- Automatically trigger on/ off devices like light controls when motion is detected
- Receive reports on your phone, tablet, or web browser via our Smartenit app, when unexpected motion is detected in your system while you're out
- Turn on lights when driving into the garage so you don't have to enter a dark house
- Saves energy and only turns lights on if ambient light level is below user set threshold
- Know the temperature in a room
-
ZBALRM Model # 1021A
Add sound and visual alerts to your Zigbee home security with the ZBALRM Siren/Strobe Warning Device. The Warning Device has four distinct alert sounds (fire alert, emergency alert, burglar alert, and doorbell) that can be activated by other Zigbee devices like our ZBMS3 3-button switch or ZBALRMB doorbell ringer. The Warning Device is powered by an AC adapter (with 3 AAA batteries for backup) and includes an anti-tamper feature. As a Zigbee device it acts as a router and helps extend the network range and robustness.Smart Possibilities
- Deter intruders with a loud intruder alert when a zone trips in your Zigbee security system
- Get a pleasant chime sound and create an event in your automation system by pairing with our ZBALRMB pushbutton switch. Event can also be used to activate outdoor lights or video camera feeds
- Activate a visual alarm if your ZBMS3 motion sensor detects motion at certain times
- Prevent major water damage by having the siren alert you when a liquid sensor like our ZBLIQS is tripped
-
ZBALRMB - Model # 6002A
Use the ZBALRMB door bell and wireless switch to include your entryway in your home automation network. ZBALRMB can wirelessly communicate with other devices like our ZBALRM alarm and our multiple lighting control options to announce when someone is at your door. Battery powered, it can be wall mounted or kept portable, as a convenient remote control.Smart Possibilities
- Bind it to a chime and outdoor lighting control to be notified when someone is at the door
- Use it within a Smartenit home automation system to receive an SMS message and record video from an IP based camera
- Keep it unattached and use it as a convenient way to turn ON/ OFF a pool pump or open/ close a water valve
-
Sale!
ZBMSKT1- Model # 4035A
Remotely controlled outlet allows on/off switching of lamps and appliances from phone, tablet, or web browser. The ZBMSKT1 also measures energy consumption plus other electrical parameters like voltage, current, frequency and power factor to integrate appliances into smart Zigbee energy management systems. Many energy saving programs can be implemented including load scheduling, activating at times of lowest energy cost, fighting “Vampire Power” (power drawn by some appliances even when they are off) and controlling the appliance in response to the behavior of other connected devices.Smart Possibilities
- Eliminate idle power drawn by devices that are OFF or in standby
- Turn devices ON/OFF via the free Smartenit app from your phone, tablet, web browser
- Set schedules based on time and sunset/sunrise
- Turn off appliance when energy threshold is reached
- Monitor power consumption and predict monthly energy bills
-
ZBVC-1 - Model # 1023A
This wireless valve controller easily installs onto existing ball valves to give you remote control over your water or gas lines. You can monitor and control your valves from your phone, tablet, or computer. You can even set schedules to limit consumption and close or open valves based on sensors, preventing a small leak from becoming a big problem.Smart Possibilities
- Easily close your water line before you go on vacation to prevent potential disaster
- Open your water line only when you need water for irrigation etc.
- Shut off your water automatically if you detect a leak with our ZBLIQS leak sensor
-
ZBWS3B - Model # 4037A
This convenient wireless 3 button switch puts your home or building's automation control points within reach at any time. Control elements like lights, small appliances, pool motors, irrigation zones and more with this versatile controller. Battery powered, it can be wall mounted or kept free, for use at your convenience.Smart Possibilities:
- Turn on your recirculating pump before you take a shower for instant hot water
- Turn off your kitchen appliances with one button for a quick exit in the morning
- Quickly override your pool pump's schedule for adjustments on the fly
-
ZBWDS - Model # 1017A
You can use this Zigbee HA (Home Automation Profile) wireless sensor to monitor doors, cabinets, and windows. It wirelessly reports a change in status to your Smartenit Gateway so you can receive messages right on you smartphone, tablet, or computer when anything is opened or closed!Smart Possibilities
- Receive an alert when your storage unit is opened
- Know that your teenage safely got home from school and walked in the front door
- Turn on lights automatically when you open your door to come home
-
Sale!
ZBMS3 - Model # 1019C
Your home control system becomes more intelligent the more data from the real world you can feed it. ZBMS3 really smartens up your system by providing information on motion, temperature, and ambient light that can then be used to influence other devices. Easily trigger devices such as lights or alarms based on motion, with this perfect addition to your security or energy management system.Smart Possibilities:
- Automatically trigger on/ off devices like light controls when motion is detected
- Receive reports on your phone, tablet, or web browser when unexpected motion is detected in your system while you're out
- Turn on lights when driving into the garage so you don't have to enter a dark house
- Saves energy and only turns lights on if ambient light level is below user set threshold
-
Metering Smart Plug # 5010Q (zigbee HA) and 5010P (zigbee SEP 1.x)
Monitor and control lamps and appliances right from your phone, tablet, or web browser. This smart plug tracks energy consumption data while also allowing remote on/off control for complete appliance energy management. Use to fight "Vampire Power" (power drawn by some appliances even when they are not on) and to eliminate idle power waste.Smart Possibilities:
- Turn devices on/ off via the free Smartenit app from your phone, tablet, or web browser
- Use our app to control appliances based on schedules or condition of other devices
- Connect an appliance to a utility Smart Meter for demand response programs (SEP 1.x version)
- Keep track of energy consumption and power quality
-
Sale!Out of stock
ZBMLC30 - Model # 4040B
Remotely control and monitor up to two of your larger energy-consuming appliances with this wireless 30A load switch. Suited for indoor or outdoor control of pool pumps, water heaters, and electric dryers, the device also lets you see on/off status and energy consumption. Set schedules and get alerts about large energy consumers before they drive up your energy bill. -
Sale!
ZBMLC15 - Model # 4034A
Monitor and control appliances, overhead lights, ceiling fans, and more all from behind a switch or outlet, or anywhere. This load controller smartens any switch, outlet, or fixture with energy metering (usable range 30-2,500 Watts), all while remaining hidden. Use one of our gateways or any ZigBee HA compatible controller to remotely access connected lights or appliances and to control them based on their energy consumption.Smart Possibilities:
- Eliminate idle power drawn by devices that are off or on standby
- Trigger lights with motion sensors
- Turn on ceiling fans when rooms get to a certain temperature
- Use your lights to make it look like you're home when you're away
-
ZBHT-2 - Model # 1015C
Make yourself and your home control system aware of the temperature and humidity anywhere with the addition of this battery-operated sensor with a built-in display. Our ZBHT-2 allows you to automatically trigger devices like fans, automatic blinds, and HVAC systems in response to environmental conditions. Keep your home or buildings comfortable and save energy with this responsive system.Smart Possibilities:
- Receive alerts when rooms with sensitive equipment get above a certain temperature or humidity level
- Automatically trigger your HVAC system or ceiling fans in response to temperature thresholds
- Keep greenhouses operating at optimal conditions
- See your home's temperature and humidity readings from your phone, tablet, or web browser
