Input/Output Controllers Comparison
| Products | EZIO2X4 |
IOT4R |
EZIO8SA |
IOT8-Z |
|
| Protocols | Insteon and X10 | Insteon, X10 and WiFi | Insteon and X10 | ZigBee, WiFi, LoRa | |
| Outputs | 2 | 4 | 8 | ||
| Output Type | Relays (normally open) | Relays (both normally open and normally closed provided) | |||
| Relay Ratings | 30VDC/120VAC, 0.5A | 30VDC/120VAC, 0.5A | 24VDC/120VAC, 3A | ||
| Output Uses | General purpose contact closures (on/off control) of electrical loads limited by relay voltage and current ratings. | ||||
| Output Timers | Timers from 1 second to 255 minutes can be set up to automatically turn off an output upon receipt of an “On” command | ||||
| Controls | On and Off remote commands | ||||
| INSTEON Control | Each output can be linked to an Insteon group to be controlled by an Insteon scene controller (Ex. Keypadlinc, Switchlinc, etc.)
“All-Link”: A snapshot of the outputs can be recalled with a single group command (i.e. respond to a switch or a button on a Keypadlinc, ControlLinc, etc.) |
||||
| Inputs | 4 | None | 7 | 6 | |
| Input Type | 2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC) | N/A | 4 Opto-isolated (3-30VDC), 2 digital or analog (0-3VDC) | ||
| Input Uses | Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. | N/A | Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. | ||
| Input Detection | OFF to ON and ON to OFF transitions can be detected on digital inputs given the presence or absence of input voltage, or on analog inputs when a given voltage level is detected. For analog inputs, the voltage levels can also be read. | ||||
| Input Timers | Delayed OFF commands (from 1 to 255 minutes) programmable on each input. This timer resets (starts over) if a new ON command is received. | ||||
| Insteon Links | 31 | 31 | More than 512 (external PLM) | More than 512 | |
Products in this category
-
Sale!
ZBMSKT1- Model # 4035A
Remotely controlled outlet allows on/off switching of lamps and appliances from phone, tablet, or web browser. The ZBMSKT1 also measures energy consumption plus other electrical parameters like voltage, current, frequency and power factor to integrate appliances into smart Zigbee energy management systems. Many energy saving programs can be implemented including load scheduling, activating at times of lowest energy cost, fighting “Vampire Power” (power drawn by some appliances even when they are off) and controlling the appliance in response to the behavior of other connected devices.Smart Possibilities
- Eliminate idle power drawn by devices that are OFF or in standby
- Turn devices ON/OFF via the free Smartenit app from your phone, tablet, web browser
- Set schedules based on time and sunset/sunrise
- Turn off appliance when energy threshold is reached
- Monitor power consumption and predict monthly energy bills
-
Sale!Out of stock
ZBMLC30 - Model # 4040B
Remotely control and monitor up to two of your larger energy-consuming appliances with this wireless 30A load switch. Suited for indoor or outdoor control of pool pumps, water heaters, and electric dryers, the device also lets you see on/off status and energy consumption. Set schedules and get alerts about large energy consumers before they drive up your energy bill. -
ZBMLCSR - Model # 4040C-xx
Remotely control and monitor your larger energy-consuming appliances and include them in intelligent energy management with a ZBMLCSR wireless load switch. Perfectly suited for pool pump control and electric heater management, the device also lets you see load status and energy consumption. Use with your home automation or IoT control system and set schedules and get alerts about large energy consumers before they drive up your energy bill. This device is available in either a Normally Open (load will remain de-energized in the event of a device failure) or Normally Closed (load will stay energized) configuration. Choose a preferred protocol among Zigbee, WiFi and LoRa. For a dual load version, see our ZBMLC30Smart Possibilities:
- Turn on/ off large devices from anywhere
- Monitor energy consumption at the appliance level
- Let your water heater operate when electricity is at the lowest cost
- Run your pool pump when it's most energy efficient and least costly
- Have large appliances respond to other events in your system
-
Sale!
ZBMLC15 - Model # 4034A
Monitor and control appliances, overhead lights, ceiling fans, and more all from behind a switch or outlet, or anywhere. This load controller smartens any switch, outlet, or fixture with energy metering (usable range 30-2,500 Watts), all while remaining hidden. Use one of our gateways or any ZigBee HA compatible controller to remotely access connected lights or appliances and to control them based on their energy consumption.Smart Possibilities:
- Eliminate idle power drawn by devices that are off or on standby
- Trigger lights with motion sensors
- Turn on ceiling fans when rooms get to a certain temperature
- Use your lights to make it look like you're home when you're away
-
Metering Smart Plug # 5010Q (zigbee HA) and 5010P (zigbee SEP 1.x)
Monitor and control lamps and appliances right from your phone, tablet, or web browser. This smart plug tracks energy consumption data while also allowing remote on/off control for complete appliance energy management. Use to fight "Vampire Power" (power drawn by some appliances even when they are not on) and to eliminate idle power waste.Smart Possibilities:
- Turn devices on/ off via the free Smartenit app from your phone, tablet, or web browser
- Use our app to control appliances based on schedules or condition of other devices
- Connect an appliance to a utility Smart Meter for demand response programs (SEP 1.x version)
- Keep track of energy consumption and power quality
-
Out of stock
ZOE-MLC1 - Model # 4040A
Extend energy management and remotely monitor and control up to two of your largest energy-consuming appliances with a ZOE-MLC1. Perfectly suited for dual-speed pool pump control and electric heater management, it also provides load status and energy consumption. It even comes ready to participate in Energy Utility rebate programs. Set schedules and get alerts when energy consumption surpasses user set thresholds before they drive up your energy bill.Smart Possibilities:
- Turn on/ off large devices from anywhere
- Monitor energy consumption at the appliance level
- Run your pool pump when it's most energy efficient and least costly
- Have large appliances respond to other events in your system
- Participate in your energy utility's demand response programs and get rebates on your energy bill
