- ddamronMemberDecember 12, 2007 at 8:32 pmPost count: 20
I have a temp sensor working like a charm…
How do I go about adding more 1-wire sensors? I’d like to add 8..
with the possibility of different types of devices.. such as:
Field effect devices
🙂simplehomeMemberDecember 12, 2007 at 8:53 pmPost count: 256
At this point, the firmware only allows one DS18B20 type device on the 1-Wire bus. We will provide expanded functionality by March 2008 on the EZIO8SA only.ddamronMemberDecember 12, 2007 at 9:43 pmPost count: 20
No Problem, it’ll take me till then to figure out what and how I want to implement the 1-wire devices…
I’d really like to setup a weather station all based on 1-wire..
sense Barometric Pressure, Wind Direction/Speed, Moisture level, and of course, temperature..
Then, implement that into linuxmce via the EZBridge…
too cool.simplehomeMemberDecember 13, 2007 at 4:48 amPost count: 256
It will happen. The 8SA being the big brother in the family of IO units has 50% of its flash memory left for expansion. The feature you want is next in the list.
AlddamronMemberDecember 13, 2007 at 5:30 amPost count: 20
Sweet. Any ideas if this will be field upgradeable?
I can do JTAG if needed..madscientistMemberApril 26, 2008 at 11:54 amPost count: 3
I am looking to buy a EZIO8SA to connect 3 or 4 sensors to the 1-wire bus. Have the firmware modifications been made to permit the device to support more than one sensor?simplehomeMemberApril 26, 2008 at 7:01 pmPost count: 256
Not quite yet. We are behind on adding this feature and had to push it back about 2 months. Thanks for your patience.
AlmadscientistMemberOctober 5, 2008 at 11:47 pmPost count: 3
Has the firmware been updated yet? I am still waiting to buy one, but want the new firmware.GaryFunkMemberOctober 6, 2008 at 1:35 amPost count: 5
Me too. I have a few ideas that will make my home a little happier.GaryFunkMemberOctober 14, 2008 at 2:05 pmPost count: 5
Can we get an update on this thread, please?jongMemberOctober 15, 2008 at 9:04 pmPost count: 2
I too am very interested in seeing this feature implemented. Any feedback on the timing of when this will be available?mitchmitchell1616MemberDecember 18, 2008 at 6:04 pmPost count: 1
I am also interested in knowing when this feature will be available and what the upgrade procedure will be. Thanks!majidMemberJanuary 10, 2009 at 12:30 amPost count: 1
Any update from simplehome on the 1-wire supprot expansion? users are silently waiting !
- You must be logged in to reply to this topic.