HOME Forums Controllers EZUIRT EZUIRT Now Available

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Anonymous
    Inactive
    Post count: 408

    EZUIRT is a multi-functional device that a) converts signals from IR remote controllers into INSTEON and X10, b) converts INSTEON commands into IR signals, and c) distributes the IR signals received through up to eight external emitters (IR Blaster function.)

    The EZIURT will be released mid march at 109 USD.
    http://www.simplehomenet.com/prods.asp?page_id=prodServers_EZUIRT
    http://www.simplehomenet.com/Downloads/EZUIRT%20Quick-start.pdf

    It is both a receiver and sender of IR signals over Insteon and X10.

    The module can learn up to 40 X10, NEC, RC5 or SONY IR codes.

    The device can function as an IR repeater or distribution box (IR blaster) sending the IR signals received through 4 separate jacks that accommodate up to 8 IR emitters (not included). The transmitted IR code is NEC.

    Anonymous
    Inactive
    Post count: 408

    We are VERY excited about this. We have improved a couple of features, include IR transmission of not just NEC but also RC5 and SONY. We also provided support to use it as a IR distribution hub.

    We have updated the quick guide:
    http://www.simplehomenet.com/Downloads/EZUIRT%20Quick-start.pdf

    Summary:
    – Receive (X10, NEC, RC5 or SONY) IR Codes.
    – Supports Insteon codes On / Off / Toggle / Bright / Dim via programming with the button on the side, and any command you want using our free utility.
    – Can send IR codes (NEC, RC5, SONY) from an Insteon command
    – Can be used as an IR distribution / repeater hub. The default is 38KHz but this can be changed

    Price is 109USD – this comes with the module, and an IR sensor built INTO the module.
    You can connect an external sensor (sold separately from us, or you can use another you have laying around, the pinout is in the quickguide). You can also connect up to 8 IR emitters.

    Anonymous
    Inactive
    Post count: 408
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.