HOME › Forums › Controllers › EZSnsRF › reset method

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • Anonymous
    Inactive
    September 4, 2007 at 11:48 am
    Post count: 8
    #39777

    Is there a way to reset the EzSnsRf? I have set the off command for 4 minutes, but would now like to shorten the time. How do I do that?

    Anonymous
    Inactive
    September 9, 2007 at 10:56 pm
    Post count: 256
    #41053

    Please download our Utlity Suite. You’ll find a tab for EZSnsRF that will allow you to change the timer value.

    Anonymous
    Inactive
    August 3, 2008 at 1:14 pm
    Post count: 8
    #41054

    I have been able to perform a reset with the utility. Unfortunately, I need to do this every couple of months.

    I have a problem w/ my EzSnsRf where it does not receive signals from my driveway sensor even though it is only 100 feet away and the chime that comes with the driveway sensor is working fine 1000 feet away. Turning the power off and on will fix the problem temporarily (for 1/2 a day). Only a reset with the utility program will solve the problem for a couple of months.

    Unfortunately, the utility program only works with a PLC, but I run my house with a PLM; so running the utility requires me to bring my unit to another location with a PLC, etc.

    In summary, I know the driveway sensor is sending a signal, but the EzSnsRf does not always pick it up (or if it does, becomes incapable of sending a signal on to insteon/homeseer). My chime works just fine. Is there a chance I just have a bad unit?

    Anonymous
    Inactive
    August 3, 2008 at 5:27 pm
    Post count: 408
    #41055

    You should not be having to reset every few months – please contact support

    Support: support@simplehomenet.com
    Phone: 877-495-0144 or 949-429-3303

    I am also going to be forwarding this thread.

    Anonymous
    Inactive
    August 3, 2008 at 6:23 pm
    Post count: 256
    #41056

    We’ve made some corrections on the firmware affecting the timers and fixing an issue where the EZSnsRF goes offline, requiring a reset. Just send the unit back to us for a free upgrade. If you did not buy it directly from us, please enclose either a check for $5 payable to Compacta International, Ltd., or a prepaid label to return your unit.

    Anonymous
    Inactive
    August 3, 2008 at 8:37 pm
    Post count: 18
    #41057

    @simplehome wrote:

    We’ve made some corrections on the firmware affecting the timers and fixing an issue where the EZSnsRF goes offline, requiring a reset. Just send the unit back to us for a free upgrade. If you did not buy it directly from us, please enclose either a check for $5 payable to Compacta International, Ltd., or a prepaid label to return your unit.

    What is the new/latest firmware version ?

    Thanks !

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.