HOME › Forums › General › Feedback to Smartenit › Get Seneor Value Command

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Anonymous
    Inactive
    May 9, 2008 at 4:30 am
    Post count: 6
    #39945

    These questions refer to an EZIO8SA. What sensor data is returned when the Cmd2 = 0x00, 0x01, 0x02 and 0x04? Is it from an output, digital input, analog input or 1-Wire?

    Also, how do you read the value of the analog inputs?

    Anonymous
    Inactive
    May 9, 2008 at 6:59 am
    Post count: 256
    #41740

    Analog channels can be read by peeking at locations 0x4c an 0x4d (10 bits) for An1 and 0x4e and 0x4f for An2. The 1-Wire data is at location 0x50. The read sensor always reads the 1-wire data (8 bits). See the Advance Detals and Command Set document.

    Al

    Anonymous
    Inactive
    May 9, 2008 at 9:03 pm
    Post count: 6
    #41741

    If the “Read Sensor” command always returns the value of the 1-Wire input, why are there four arguments for the command?

    Anonymous
    Inactive
    May 10, 2008 at 1:12 am
    Post count: 1001
    #41742

    The following thread has information on the 1-wire enhancement

    http://www.simplehomenet.com/forum/viewtopic.php?t=264

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.