Hello:
I use the EZIO8SA with Indigo. WHen I chang the 1-wire settings and select the SET ALL button the EZIO8SA mixes up the outputs. Even if I just select the SET ALL button without making any changes I get the following. The only way to correct it is to unplug the EZIO8SA from the PLM to reset it.
Can anyone help me on this?
FIRST TEST:
–I select the “SET ALL” button
–manually select the garage module ON from the Device list
Sent INSTEON “garage” on
Trigger Action 114 garage on – LED OFF
Sent INSTEON “EZIO8SA – output 4” on (ack: 0, 0, 0, 1, 0, 0, 0, 0) –4th output on is correct
Received INSTEON “EZIO8SA” outputs status changed: 0, 0, 0, 1, 0, 0, 0, 0
Sent INSTEON “EZIO8SA – output 3” on (ack: 0, 0, 1, 1, 0, 0, 0, 0) –third output on is correct
Received INSTEON “EZIO8SA” outputs status changed: 0, 0, 1, 1, 0, 0, 0, 0
–manually select the garage module off
Sent INSTEON “garage” off
Trigger Action 115 garage off – LED ON
Sent INSTEON “EZIO8SA – output 4” off (ack: 0, 0, 1, 0, 0, 0, 0, 0) –output 4 off is correct
Sent INSTEON “EZIO8SA – output 3” off (ack: 0, 1, 0, 0, 0, 0, 0, 0) –output 3 off is correct but output 2 comes on which it shouldn’t, I have to unplug the EZIO8SA from the PLM to reset it to work correctly.
SECOND TEST;
Dec 9, 2007 10:27:12 AM
Sent INSTEON “garage” on –manually select garage module ON
Trigger Action 114 garage on – LED OFF
Sent INSTEON “EZIO8SA – output 3” on (ack: 0, 0, 1, 0, 0, 0, 0, 0) –output 3 comes ON
Sent INSTEON “EZIO8SA – output 4” on (ack: 1, 1, 0, 0, 0, 0, 0, 0)–it says output 4 but shows output 1 & 2
Received INSTEON “EZIO8SA” outputs status changed: 0, 0, 1, 1, 0, 0, 0, 0 –now shows output 3 & 4
Dec 9, 2007 10:27:29 AM
Sent INSTEON “garage” off –manually select garage module OFF
Trigger Action 115 garage off – LED ON
Sent INSTEON “EZIO8SA – output 3” off (ack: 0, 0, 0, 1, 0, 0, 0, 0) –output 3 goes off
Sent INSTEON “EZIO8SA – output 4” off (ack: 1, 1, 0, 0, 0, 0, 0, 0) –output 1 & 2 come on although it says output 4 off
