HOME › Forums › Gateways › Raspberry Pi › Unable to get zbpserver to work fully

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Anonymous
    Inactive
    November 4, 2016 at 11:16 pm
    Post count: 5
    #40509

    Hi,

    I successfully installed the zbpserver on my Raspberry 3 and I successfully added a light switch (via the Add Manually Option) to the configuration and I successfully can turn it on and off.

    Next, I want to add one of my EzFlora devices but I fail doing that. I again choose the “Add Manually Option”, set the Insteon ID and hit the “save” button. Then a dialog box comes up that says “Adding Insteon Device”. After 30 sec or so, the dialog box goes away and no new devices are added.

    I don’t dare to use the “Add by Discovery” because my main controller is an ISY.

    The main reason I’m trying the zbpserver is that I’m hoping zbpserver has better support for an EzIO8SA than my ISY (and I would like to buy a 2nd EzIO8SA…)

    Hopefully it is something silly that I’m doing wrong…

    Thanks

    Bert

    This is the relevant portion of the log:
    Nov 4 16:09:51 pi7 ZBPServer[608]: NodeMgmt:: Adding insteon device: add: 212100
    Nov 4 16:09:51 pi7 ZBPServer[608]: Checking if Device is online.
    Nov 4 16:09:51 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 0062 len: 06 data: 02 62 21 21 00 0f 0d 00
    Nov 4 16:09:52 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 0050 len: 09 data: 21 21 00 3c 4d 3c 2f 0d 02
    Nov 4 16:09:52 pi7 ZBPServer[608]: Send Start Link to PLM.
    Nov 4 16:09:52 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 0064 len: 02 data: 02 64 03 01
    Nov 4 16:09:52 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 0064 len: 03 data: 03 01 06
    Nov 4 16:09:52 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 006b len: 01 data: 02 6b 40
    Nov 4 16:09:52 pi7 ZBPServer[608]: Sending EnterLinkMode to Device: 212100
    Nov 4 16:09:52 pi7 ZBPServer[608]: NodeMgmt:: EnterLinkUnlinkMode for i2cs device..
    Nov 4 16:09:52 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 006b len: 02 data: 40 06
    Nov 4 16:09:53 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 0062 len: 14 data: 02 62 21 21 00 1f 09 01 00 00 00 00 00 00 00 00 00 00 00 00 00 f6
    Nov 4 16:09:53 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 0050 len: 09 data: 21 21 00 3c 4d 3c 2f 09 00
    Nov 4 16:09:53 pi7 ZBPServer[608]: Node_InsX10AddDeviceInternal :: New Node added
    Nov 4 16:09:53 pi7 ZBPServer[608]: workerThread:: Trying to parse outgoing message. parser not set.
    Nov 4 16:09:53 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 0050 len: 09 data: 21 21 00 3c 4d 3c 23 09 00
    Nov 4 16:09:54 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 0062 len: 06 data: 02 62 30 cb b1 0f 19 00
    Nov 4 16:09:54 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 0050 len: 09 data: 30 cb b1 3c 4d 3c 2f 02 00
    Nov 4 16:10:10 pi7 ZBPServer[608]: NodeMgmt:: Enabling monitor mode in PLM
    Nov 4 16:10:10 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 006b len: 01 data: 02 6b 40
    Nov 4 16:10:10 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 006b len: 02 data: 40 06
    Nov 4 16:10:56 pi7 ZBPServer[608]: SystemMgmt::searching controller..
    Nov 4 16:10:56 pi7 ZBPServer[608]: SystemMgmt::Sys_GetIMInfo..
    Nov 4 16:10:56 pi7 ZBPServer[608]: ZBP_packet:: [TX] (00) Cmd: 0060 len: 00 data: 02 60
    Nov 4 16:10:56 pi7 ZBPServer[608]: ZBP_packet:: [RX] (00) Ins. Cmd: 0060 len: 07 data: 3c 4d 3c 03 15 9e 06

    Anonymous
    Inactive
    November 7, 2016 at 8:49 pm
    Post count: 146
    #44607

    Hi Robert,

    Thank you for your message.

    It looks like your devices are talking to each other but there isn’t a link being made between the devices for some reason. I cannot tell why by your logs, however.

    You can try to add by discovery to see if that gives you any better success? We do not do anything with existing links, we just add to what’s already there so you shouldn’t have anything to worry about your existing links with the ISY.

    Anonymous
    Inactive
    November 10, 2016 at 5:09 pm
    Post count: 5
    #44608

    Thanks Justin,

    I did what you suggested and it ‘discovered’ my EZIO8SA without pushing any buttons.

    Thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.