HOME › Forums › Gateways › EZSrve › Scene execution not working

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • Anonymous
    Inactive
    October 3, 2012 at 10:52 pm
    Post count: 131
    #40351

    I am having troubles with a scene executing correctly. I have traced the execution via telnet (see below). Can anyone help me figure this one out?

    Debug Mode started for EZServe
    
10/03/2012 18.48.00: In process actions: Activate effect
    
10/03/2012 18.48.00: In process actions: Effect to process and action Night ON
    
10/03/2012 18.48.00: In form cluster actor queue: attr name Status, attr value 0xFF
    
10/03/2012 18.48.00: Form clustr: CB-0: [4] CB-I: [4] CB-II: [E] CB-III: [0] CB-IV: [61] CB-V: [FF] CB-VI: [0] CB-VII: [0] CB-VIII: [0] CB-IX: [0]
    
10/03/2012 18.48.00: In actor requst process: actor queue ActorArray0 4,ActorArray4 61,ActorArray5 ff
    
10/03/2012 18.48.00: In plm msg handler: Ins grp 0x4, Grpcmd 0x11
    
10/03/2012 18.48.00: Done: MSG Code 61, ID 04.11.04 Cmd1 4D, Cmd2 67 Ack 2B
    
10/03/2012 18.48.00: In actor resp processor: cluster api in progress for ID[04.11.04], RespArray9[0], RespArray10[0]
    
10/03/2012 18.48.00: In get cluster action: CID 0, attrnum 0
    
10/03/2012 18.48.00: In update cluster ram insstd: attr 0 value FF
    
10/03/2012 18.48.00: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.48.00: Error Sending
    
10/03/2012 18.48.00: Done: PTH_StdMsg 50, ID 19.05.8F Flag 61, Cmd1 11, Cmd2 4
    
10/03/2012 18.48.00: Done: PTH_StdMsg 50, ID 18.88.47 Flag 61, Cmd1 11, Cmd2 4
    
10/03/2012 18.48.01: Done: PTH_StdMsg 50, ID 14.FF.A8 Flag 61, Cmd1 11, Cmd2 4
    
10/03/2012 18.48.01: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 61, Cmd1 11, Cmd2 4
    
10/03/2012 18.48.01: Done: MSG Code 58, ID 06.C4.86 Cmd1 4D, Cmd2 67 Ack 61
    
10/03/2012 18.48.01: File: PLM.c Fn: PLM_Process - All Link Clean-Up Group Status/Failure Report - 58 N/Ack/Grp - 6
    
10/03/2012 18.48.01: In update dev status: dev 04 status updated cmd FF, Grp FFFFFFFF
    
10/03/2012 18.48.01: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.48.01: Error Sending
    
10/03/2012 18.48.01: In poll scene dev: devrec 15
    
10/03/2012 18.48.01: Done: PTH_StdMsg 50, ID 15.04.47 Flag 61, Cmd1 11, Cmd2 4
    
10/03/2012 18.48.01: Done: MSG Code 62, ID 14.FF.A8 Cmd1 19, Cmd2 0 Ack 6
    
10/03/2012 18.48.01: Done: PTH_StdMsg 50, ID 14.FF.A8 Flag 2B, Cmd1 1B, Cmd2 FF
    
10/03/2012 18.48.01: In update dev status: dev 14.FF.A8 status updated cmd FF, Grp FFFFFFFF
    
10/03/2012 18.48.01: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.48.01: Error Sending
    
10/03/2012 18.48.02: In poll scene dev: send command to next device or resend to prev dev
    
10/03/2012 18.48.02: ezdevice.c - SaveDeviceXML: File Open Success!
    
10/03/2012 18.48.07: ReadWriteApi.c - SaveSysVarXML: File Open Success!
    
10/03/2012 18.48.07: ezaction.c - SaveActionsSysVarXML Done!

    Thanks,
    Steve

    Anonymous
    Inactive
    October 3, 2012 at 11:08 pm
    Post count: 131
    #43866

    For further assistance (maybe), I get the following errors when I try to execute the devices individually:

    10/03/2012 18.53.07: Done: MSG Code 62, ID 12.79.6D Cmd1 11, Cmd2 FF Ack 6
    
10/03/2012 18.53.07: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 11, Cmd2 FF
    
10/03/2012 18.53.07: In update dev status: dev 12.79.6D status updated cmd FF, Grp FFFFFFFF
    
10/03/2012 18.53.07: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.53.07: Error Sending
    
10/03/2012 18.53.11: In refresh_v.c: new update FF, old update 0
    
10/03/2012 18.53.11: Done: MSG Code 62, ID 12.79.6D Cmd1 19, Cmd2 0 Ack 6
    
10/03/2012 18.53.11: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 17, Cmd2 FF
    
10/03/2012 18.53.11: In update dev status: dev 12.79.6D status updated cmd FF, Grp FFFFFFFF
    
10/03/2012 18.53.11: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.53.11: Error Sending
    
10/03/2012 18.53.15: Done: MSG Code 62, ID 12.76.E6 Cmd1 11, Cmd2 FF Ack 6
    
10/03/2012 18.53.16: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 27, Cmd1 11, Cmd2 FF
    
10/03/2012 18.53.16: In update dev status: dev 12.76.E6 status updated cmd FF, Grp FFFFFFFF
    
10/03/2012 18.53.16: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.53.16: Error Sending
    
10/03/2012 18.53.19: In refresh_v.c: new update FF, old update 0
    
10/03/2012 18.53.19: Done: MSG Code 62, ID 12.76.E6 Cmd1 19, Cmd2 0 Ack 6
    
10/03/2012 18.53.20: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 27, Cmd1 11, Cmd2 FF
    
10/03/2012 18.53.20: In update dev status: dev 12.76.E6 status updated cmd FF, Grp FFFFFFFF
    
10/03/2012 18.53.20: In form cluster rep insstd: tot attr 1, cid 0
    
10/03/2012 18.53.20: Error Sending
    Anonymous
    Inactive
    October 4, 2012 at 2:19 am
    Post count: 1001
    #43867

    What are the device types of the two devices? How old are they?

    Anonymous
    Inactive
    October 4, 2012 at 12:23 pm
    Post count: 131
    #43868

    They are 1kW SwitchLincs and are about two years old.

    Anonymous
    Inactive
    October 4, 2012 at 10:50 pm
    Post count: 1001
    #43869

    The Scene On request got ACKs from 4 devices

    10/03/2012 18.48.00: Done: PTH_StdMsg 50, ID 19.05.8F Flag 61, Cmd1 11, Cmd2 4
    10/03/2012 18.48.00: Done: PTH_StdMsg 50, ID 18.88.47 Flag 61, Cmd1 11, Cmd2 4
    10/03/2012 18.48.01: Done: PTH_StdMsg 50, ID 14.FF.A8 Flag 61, Cmd1 11, Cmd2 4
    10/03/2012 18.48.01: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 61, Cmd1 11, Cmd2 4

    If you are referring to the Error Sending messages they are not errors.

    What is the actual problem?

    Anonymous
    Inactive
    October 4, 2012 at 10:57 pm
    Post count: 131
    #43870

    That is funny. That is what I was coming to the conclusion.

    The problem is that the scene executes at the scheduled time (it just did). But 4 of the devices are not turning on, but 6 of the other devices in that scene are.

    The 4 devices that are not turning on are all 1kW SwitchLincs. The other devices are either plug-in modules or sockets. All devices are Insteon (no Icon).

    Is there something else (other than telnet) that I can use to monitor the execution of the scene that will help me determine what is going wrong?

    Thanks,
    Steve

    Anonymous
    Inactive
    October 4, 2012 at 11:28 pm
    Post count: 1001
    #43871

    Telnet is as detailed as it gets. There does not appear to be 10 devices in the Group 4 Scene.

    What are the Insteon addresses of the devices that do respond and the Insteon addresses of the devices that do not.

    What is the LD3 value in the four devices that do not respond. Smartlabs has changed the LD3 value from 0 to 1 but I do not think that change went back two years.

    Anonymous
    Inactive
    October 4, 2012 at 11:40 pm
    Post count: 131
    #43872

    Apparently I was wrong once again, or maybe things are not being consistent. Either way, I just turned everything OFF. Then I turned ON the scene. All the devices turned on, with the exception of two devices (1A.A6.B6, 1A.A8.B4) both of which are 1kW SwitchLincs that I purchased about 2 years ago.

    Here is the full scene being turned on:

    10/04/2012 19.34.16: Done: MSG Code 61, ID 07.11.07 Cmd1 4D, Cmd2 67 Ack 2B
    
10/04/2012 19.34.17: Done: PTH_StdMsg 50, ID 15.04.47 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.17: Done: PTH_StdMsg 50, ID 12.79.6D Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.17: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.17: Done: PTH_StdMsg 50, ID 1A.A6.B6 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.18: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.18: Done: PTH_StdMsg 50, ID 19.05.8F Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.18: Done: PTH_StdMsg 50, ID 14.FF.A8 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.18: Done: PTH_StdMsg 50, ID 14.1D.AA Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.19: Done: PTH_StdMsg 50, ID 14.2E.1B Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.19: Done: PTH_StdMsg 50, ID 14.2D.2A Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.19: Done: PTH_StdMsg 50, ID 18.85.5F Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.19: Done: PTH_StdMsg 50, ID 14.37.9D Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.20: Done: PTH_StdMsg 50, ID 14.35.2F Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.20: Done: PTH_StdMsg 50, ID 18.88.47 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.20: Done: PTH_StdMsg 50, ID 13.FB.30 Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.20: Done: MSG Code 58, ID 06.FB.30 Cmd1 4D, Cmd2 67 Ack 61
    
10/04/2012 19.34.20: File: PLM.c Fn: PLM_Process - All Link Clean-Up Group Status/Failure Report - 58 N/Ack/Grp - 6
    
10/04/2012 19.34.20: In update dev status: dev 07 status updated cmd FF, Grp FFFFFFFF
    
10/04/2012 19.34.20: In form cluster rep insstd: tot attr 1, cid 0
    
10/04/2012 19.34.20: Error Sending
    
10/04/2012 19.34.20: In poll scene dev: devrec 15
    
10/04/2012 19.34.20: Done: PTH_StdMsg 50, ID 14.00.5A Flag 61, Cmd1 11, Cmd2 7
    
10/04/2012 19.34.20: Done: MSG Code 62, ID 14.FF.A8 Cmd1 19, Cmd2 0 Ack 6
    
10/04/2012 19.34.21: Done: PTH_StdMsg 50, ID 14.FF.A8 Flag 2B, Cmd1 1B, Cmd2 FF
    
10/04/2012 19.34.21: In update dev status: dev 14.FF.A8 status updated cmd FF, Grp FFFFFFFF
    
10/04/2012 19.34.21: In form cluster rep insstd: tot attr 1, cid 0
    
10/04/2012 19.34.21: Error Sending
    
10/04/2012 19.34.21: In poll scene dev: send command to next device or resend to prev dev
    
10/04/2012 19.34.21: Done: MSG Code 62, ID 14.1D.AA Cmd1 19, Cmd2 0 Ack 6
    
10/04/2012 19.34.21: Done: PTH_StdMsg 50, ID 14.1D.AA Flag 2B, Cmd1 1B, Cmd2 FF
    
10/04/2012 19.34.21: In update dev status: dev 14.1D.AA status updated cmd FF, Grp FFFFFFFF
    
10/04/2012 19.34.21: In form cluster rep insstd: tot attr 1, cid 0
    
10/04/2012 19.34.21: Error Sending
    
10/04/2012 19.34.21: In poll scene dev: send command to next device or resend to prev dev
    
10/04/2012 19.34.21: Done: MSG Code 62, ID 14.2E.1B Cmd1 19, Cmd2 0 Ack 6
    
10/04/2012 19.34.22: Done: PTH_StdMsg 50, ID 14.2E.1B Flag 2B, Cmd1 1B, Cmd2 FF
    
10/04/2012 19.34.22: In update dev status: dev 14.2E.1B status updated cmd FF, Grp FFFFFFFF
    
10/04/2012 19.34.22: In form cluster rep insstd: tot attr 1, cid 0
    
10/04/2012 19.34.22: Error Sending
    
10/04/2012 19.34.22: In poll scene dev: send command to next device or resend to prev dev
    
10/04/2012 19.34.22: Done: MSG Code 62, ID 14.2D.2A Cmd1 19, Cmd2 0 Ack 6
    
10/04/2012 19.34.22: Done: PTH_StdMsg 50, ID 14.2D.2A Flag 2B, Cmd1 13, Cmd2 FF
    
10/04/2012 19.34.22: In update dev status: dev 14.2D.2A status updated cmd FF, Grp FFFFFFFF
    
10/04/2012 19.34.22: In form cluster rep insstd: tot attr 1, cid 0
    
10/04/2012 19.34.22: Error Sending
    
10/04/2012 19.34.22: In poll scene dev: send command to next device or resend to prev dev
    
10/04/2012 19.34.22: In refresh_v.c: new update FF, old update 0
    
10/04/2012 19.34.22: ezdevice.c - SaveDeviceXML: File Open Success!
    
10/04/2012 19.34.28: ReadWriteApi.c - SaveSysVarXML: File Open Success!
    
10/04/2012 19.34.28: ezaction.c - SaveActionsSysVarXML Done!

    Here are the two devices that didn’t turn ON with the scene, but they did turn on when I did them individually:

    10/04/2012 19.35.24: Done: MSG Code 62, ID 1A.A6.B6 Cmd1 11, Cmd2 FF Ack 6
    
10/04/2012 19.35.24: Done: PTH_StdMsg 50, ID 1A.A6.B6 Flag 2B, Cmd1 11, Cmd2 FF
    
10/04/2012 19.35.28: Done: MSG Code 62, ID 1A.A6.B6 Cmd1 19, Cmd2 0 Ack 6
    
10/04/2012 19.35.28: Done: PTH_StdMsg 50, ID 1A.A6.B6 Flag 2B, Cmd1 2F, Cmd2 FF
    
10/04/2012 19.35.31: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 11, Cmd2 FF Ack 6
    
10/04/2012 19.35.31: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 11, Cmd2 FF
    
10/04/2012 19.35.35: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 19, Cmd2 0 Ack 6
    
10/04/2012 19.35.36: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 2E, Cmd2 FF

    I don’t know if this helps, but here are the link records for one of the 1kW SL that does not work (1A.A6.B6) and for one that does (12.76.E6):
    Anonymous
    Inactive
    October 5, 2012 at 12:03 am
    Post count: 1001
    #43873

    The earlier post is for Group (Scene) 4. The latest post is for Group (Scene) 7.

    Anonymous
    Inactive
    October 5, 2012 at 12:10 am
    Post count: 131
    #43874

    Sorry about that, I believe I pasted the original scene before I did some other testing and deleted that one. The Scene 7 is the full scene and the one that is causing the problems now. Sorry for any confusion.
    Steve

    Anonymous
    Inactive
    October 5, 2012 at 12:39 am
    Post count: 1001
    #43875

    Both 1A.A6.B6 and 1A.A8.B4 ACKed the Group (Scene) 7 On.

    10/04/2012 19.34.17: Done: PTH_StdMsg 50, ID 1A.A6.B6 Flag 61, Cmd1 11, Cmd2 7
    10/04/2012 19.34.18: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 61, Cmd1 11, Cmd2 7

    This means both devices received the On command and accepted it. Try setting the LD3 value to 1 in those two devices.

    From

    To

    Anonymous
    Inactive
    October 5, 2012 at 1:15 am
    Post count: 131
    #43876

    That was it!

    Thank you so much (again).

    I will document that, since I obviously had it right before now. Have a great evening.

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.