HOME › Forums › Gateways › EZSrve › New MAC address? WTF?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Anonymous
    Inactive
    August 17, 2008 at 5:20 am
    Post count: 3
    #40040

    After a power cycle, my EZ Serv now has a new MAC address even after a hard reset of all default settings.

    The MAC address changed from 00:40:9d:2b:48:6c to 00:40:9d:43:35:97. The sticker on the internal ethernet module indicates the :6c address. When it requests a new DHCP address, :97 is the MAC that does the asking.

    How is this possible? I’m running firmware 1.42.

    Anonymous
    Inactive
    August 17, 2008 at 8:09 am
    Post count: 1001
    #42167

    You might take a look at the following post …..

    http://simplehomenet.com/forum/viewtopic.php?t=509&start=0&postdays=0&postorder=asc&highlight=

    which talked about doing a hard reset and the technique Paul described toward the bottom of the topic to get the unit back to normal.

    Not sure if that technique works on an image that far back.

    Anonymous
    Inactive
    August 17, 2008 at 9:15 am
    Post count: 3
    #42168

    “which talked about doing a hard reset and the technique Paul described toward the bottom of the topic to get the unit back to normal.”

    Yeah I tried that.

    Anonymous
    Inactive
    August 17, 2008 at 4:10 pm
    Post count: 1001
    #42169

    Looking back over older posts, that reset capability seems to have been added around 1.51 so it would not have worked on 1.42. There is another older post that mentions the same MAC address as you are seeing …..

    http://simplehomenet.com/forum/viewtopic.php?t=460&start=0&postdays=0&postorder=asc&highlight=

    I suspect that is the MAC address of the lowest level boot function which is all that is active after the hard reset. The above topic suggests that person was going to use TFTP to reload EZSrve. There is no follow-up post to know if that resolved the problem.

    I had to use TFTP to reload EZSrve resulting from a problem that came up while using an image that was in test. SHN recommended using SolarWinds free TFTP server download to reload EZSrve. I’ll send you the details in a PM if you are interested in trying that option.

    Anonymous
    Inactive
    August 21, 2008 at 1:55 pm
    Post count: 408
    #42170

    Please call or email us directly

    Support: support@simplehomenet.com
    Phone: 877-495-0144 or 949-429-3303

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.