Wireless 8-Relay / 6-In Input Output Controller

SKU 680569162533
$0.00
In stock
1
Product Details

    \n
  • Eight general purpose, Form-C relays rated 3A @120VAC/24VDC

  • \n
  • Four opto-isolated digital inputs (logic high: 3-30VDC)

  • \n
  • Two inputs configurable as digital (0-1VDC for OFF, 2-2.4VDC for ON) or analog (10 bit resolution)

  • \n
  • Compatible with ZigBee 3.0 and HA profile

  • \n
  • Available with LoRa protocol (select option in menu)

  • \n
  • Compatible with Insteon networks (requires a Smartenit ZBPLM).
    \n

      \n
    • Acts as an Insteon sender with each of the inputs able to trigger a unique group on/off command

    • \n
    • Responds to Insteon (direct or group) commands to turn on or off each of the 8 outputs

    • \n
    • Extensive command set for maximum programming flexibility

    • \n

    \n

  • \n
  • 1 year Smartenit warranty

  • \n

\n

Details


\nIoT8-Z is a combined input and output controller, that allows sensing incoming signals from up to 6 wired sensors (analog and digital) as well as controlling up to 8 small to medium sized devices.  This puts input/output control at the point of need, eliminating wiring nightmares.  IoT8-Z allows the use of simple and cost-effective sensors such as magnetic door contacts and analog temperature sensors.  The many combinations of sensors and actuators allow an abundance of solutions in homes, buildings, factories, farms, etc.
\n
\n NOTE: The included 12VDC power adapter is required to operate the device. To purchase additional adapters click here.
\n
\n For Insteon connectivity, purchase a compatible ZBPLM (Mfg Date 1/20/2018 or later).
\n

Smartenit Input/Output Controllers Comparison Chart


\n


































































































\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Products
OutputsEZIO2X4IoT8-ZIoT4R
Supported ProtocolsInsteon & X10ZigBee, WiFi, LoRa & InsteonInsteon, X10 and WiFi
ControlsEach output can be linked to an Insteon group to be controlled by an Insteon scene controller (Ex. Keypadlinc, Switchlinc, etc.)
INSTEON 'All-Link'A snapshot of the outputs can be recalled with a single group command (i.e. respond to a switch or a button on a Keypadlinc, ControlLinc, etc.)
TimersTimers from 1 second to 255 minutes can be set up to turn off each output
# of Outputs284
TypesRelays (normally open)Relays (both normally open and normally closed provided)Relays (both normally open and normally closed provided)
Ratings30VDC/120VAC, 0.5A24VDC/120VAC, 3A30VDC/120VAC, 0.5A
Output UsesGeneral purpose contact closures of small loads limited by relay voltage and current rating.General purpose contact closure of larger loads limited by relay voltage and current rating.General purpose contact closures of small loads limited by relay voltage and current rating.
InputsEZIO2X4IoT8-ZIoT4R
ControlsFor the digital (opto isolated) inputs, each input is ON when when current flows through the input or OFF when current is absent. Changes from OFF to ON and from ON to OFF can be used to control other ZigBee or Insteon devices. For analog inputs, voltage levels translate to points and On/Off transitions can be regulated by programmable trip points thresholds.
TimersDelayed OFF commands (from 1 to 255 minutes) programmable on each input. This timer resets (starts over) if a new ON command is received.
# of Inputs46None
Inputs Type2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC)4 Opto-isolated (3-30VDC), 2 digital or analog (0-3VDC)N/A
UsesContact closures, Digital and Analog DC Voltage sources. Isolated outputs.Contact closures, Digital and Analog DC Voltage sources. Isolated outputs.N/A
Insteon Links31More than 512 (external PLM)31
Save this product for later