8-Zone Wireless Irrigation Controller


Out of stock

RainBee8 – Model # 5010Z

You can monitor and control your irrigation system from anywhere with the RainBee8 irrigation controller via Insteon/X10 or Zigbee.  Independent control over each sprinkler zone, as well as the ability to create programs, gives you maximum flexibility.  It can even respond directly to rain or water flow sensors so you can smartly manage your water use.

Smart Possibilities:

  • Make irrigation schedules based on local sunrise or sunset to minimize evaporation loss
  • Get notified of possible sprinkler head leak when consumption is too high
  • Easily adjust timers from your smart phone if weather takes a sudden turn

Product appearance may be different than what is shown.

Rainbee8 functions the same as EZFlora and includes communication via Zigbee. 

Add Ons:

  • A 24 V AC transformer is required to power the sprinkler valves.  You can add one from the Smartenit store for $14.99 HERE.

Out of stock


  • World’s first tri-protocol irrigation controller, utilizing ZigBee (HA Profile), Insteon, and X10
  • Insteon technology for powerline communication
  • Drives standard 24 VAC sprinkler valves
  • Zone #8 may be programmed to drive an auxiliary pump. This pump would go ON anytime any of the irrigation valves are ON
  • 8 zones rated at 500 mA per zone – designed to operate 1 zone at a time.
  • Stores up to 4 program sequences, which can be recalled via a single command
  • Interfaces directly with single jet pulsing water meters
  • Smartenit App compatible
  • 1 year Smartenit warranty


RainBee8 is a compact 8 zone irrigation controller that lets you manage your irrigation system from anywhere with maximum flexibility.  We’ve taken our best selling irrigation controller, EZFlora, and added to its communication skill set!  RainBee8 speaks to ZigBee (HA profile) compatible controllers in addition to Insteon and/or X10.

RainBee8’s independent control over 8 sprinkler zones provides effective water management by watering only when your lawn, garden, or crops need it.  You have access to your system from your phone, tablet, or web browser with the iSmartenit app, allowing pinpoint control over individual zones, programs, and schedules.  It stores up to 4 individual programs that can be run with a single command.  Large properties are no problem, as one of RainBee8’s outputs can manage a booster pump.  In addition, RainBee8 offers an interface for water meters to monitor water consumption.  Including your irrigation in your home control system will end up saving you a lot of water and money!

Additional information

Weight 0.75 lbs
Dimensions 5.75 × 4.25 × 3.5 in


User Guides


Smartenit Product Number RainBee8 – ZigBee/Insteon/X10 Irrigation Controller – #5010Z
Warranty 1 year
Status LED Green/Red
Setup Memory Non-volatile EEPROM
Insteon Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 1,023
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vppinto 5 Ohms
INSTEON Minimum Receive Level 10 mVppnominal
INSTEON Messages Repeated Yes
X10 Features
X10 Primary Address 1 optional (comes unassigned and uses most of the unit codes)
X10 Powerline Frequency 131.65 KHz
X10 Minimum Transmit Level 3.2 Vppinto 5 Ohms
X10 Minimum Receive Level 20 mVppnominal
X10 Messages Repeated No
Operating Conditions Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions 4.0″ H x 2.5″ W x 1.5″ D (excluding external valve connector)
Weight 5 oz
Zone Output Rating .5 Amp
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Plug 2-pin
Certification Safety tested for use in USA and Canada (ETL #3101636)

You may also like…


Go to Top