• ZBVC-1 - Model # 1023A

    This wireless valve controller easily installs onto existing ball valves to give you remote control over your water or gas lines.  You can monitor and control your valves from your phone, tablet, or computer.  You can even set schedules to limit consumption and close or open valves based on sensors, preventing a small leak from becoming a big problem.

    Smart Possibilities

    • Easily close your water line before you go on vacation to prevent potential disaster
    • Open your water line only when you need water for irrigation etc.
    • Shut off your water automatically if you detect a leak with our ZBLIQS leak sensor
  • ZBALRMB - Model # 6002A

    Use the ZBALRMB door bell and wireless switch to include your entryway in your home automation network. ZBALRMB can wirelessly communicate with other devices like our ZBALRM alarm and our multiple lighting control options to announce when someone is at your door.  Battery powered, it can be wall mounted or kept portable, as a convenient remote control.

    Smart Possibilities

    • Bind it to a chime and outdoor lighting control to be notified when someone is at the door
    • Use it within a Smartenit home automation system to receive an SMS message and record video from an IP based camera
    • Keep it unattached and use it as a convenient way to turn ON/ OFF a pool pump or open/ close a water valve
  • Sale!

    ZBMSKT1- Model # 4035A

    Remotely controlled outlet allows on/off switching of lamps and appliances from phone, tablet, or web browser.  The ZBMSKT1 also measures energy consumption plus other electrical parameters like voltage, current, frequency and power factor to integrate appliances into smart Zigbee energy management systems.  Many energy saving programs can be implemented including load scheduling, activating at times of lowest energy cost, fighting “Vampire Power” (power drawn by some appliances even when they are off) and controlling the appliance in response to the behavior of other connected devices.

    Smart Possibilities

    • Eliminate idle power drawn by devices that are OFF or in standby
    • Turn devices ON/OFF via the free Smartenit app from your phone, tablet, web browser
    • Set schedules based on time and sunset/sunrise
    • Turn off appliance when energy threshold is reached
    • Monitor power consumption and predict monthly energy bills
  • ZBHT-2 - Model # 1015C

    Make yourself and your home control system aware of the temperature and humidity anywhere with the addition of this battery-operated sensor with a built-in display.  Our ZBHT-2  allows you to automatically trigger devices like fans, automatic blinds, and HVAC systems in response to environmental conditions.  Keep your home or buildings comfortable and save energy with this responsive system.

    Smart Possibilities:

    • Receive alerts when rooms with sensitive equipment get above a certain temperature or humidity level
    • Automatically trigger your HVAC system or ceiling fans in response to temperature thresholds
    • Keep greenhouses operating at optimal conditions
    • See your home's temperature and humidity readings from your phone, tablet, or web browser
  • Sale!

    ZBLIQS- Model # 2030A

    Use ZBLIQS to prevent damage from leaking pipes, overflowing condensation pans, leaking water heaters and more.  Its two liquid sensors and wireless transmitter offer a reliable way to detect and announce unwanted liquid before damage ensues.  As part of a Smartenit automation network, it can be used with alarms, valve controllers, on/off relays, light switches and more.  Battery powered, the ZBLIQS can be installed in remote places to effectively monitor any part of your entire property.

    Smart Possibilities

    • Set off an alarm if your AC condensation pan overflows
    • Detect leaks from frozen pipes and shut off supply through our ZBVC-1 valve controller
    • Shut off electrical equipment if water is detected nearby
    • Turn on floodlamps in your basement to illuminate leak sites
  • ZBMLC30 - Model # 4040B

    Extend energy management and remotely monitor and control up to two of your largest energy-consuming appliances with a ZBMLC30.  Perfectly suited for dual-speed pool pump control and electric heater management, it also lets you see load status and energy consumption.  Set schedules and get alerts about large energy suckers before they drive up your energy bill.

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
  • ZBMLCSR - Model # 4040C-xx

    Remotely control and monitor your larger energy-consuming appliances and include them in intelligent energy management with a ZBMLCSR wireless load switch.  Perfectly suited for pool pump control and electric heater management, the device also lets you see load status and energy consumption.  Use with your home automation or IoT control system and set schedules and get alerts about large energy consumers before they drive up your energy bill. This device is available in either a Normally Open (load will remain de-energized in the event of a device failure) or Normally Closed (load will stay energized) configuration.  Choose a preferred protocol among Zigbee, WiFi and LoRa. For a dual load version, see our ZBMLC30

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Let your water heater operate when electricity is at the lowest cost
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
  • Sale!

    ZBMLC15 - Model # 4034A

    Monitor and control appliances, overhead lights, ceiling fans, and more all from behind a switch or outlet, or anywhere.  This load controller smartens any switch, outlet, or fixture with energy metering (usable range 30-2,500 Watts), all while remaining hidden.  Use one of our gateways or any ZigBee HA compatible controller to remotely access connected lights or appliances and to control them based on their energy consumption.

    Smart Possibilities:

    • Eliminate idle power drawn by devices that are off or on standby
    • Trigger lights with motion sensors
    • Turn on ceiling fans when rooms get to a certain temperature
    • Use your lights to make it look like you're home when you're away
  • ZBMPlug15 - Model # 5010Q

    New Reduced Price - Monitor and control lamps and appliances right from your phone, tablet, or web browser.  This smart plug adapter tracks energy consumption data while also allowing remote on/ off control for complete energy management.  Fight "Vampire Power" (power drawn by some appliances even when they are not on)  and eliminate idle power waste with the ZBMPlug15.

    Smart Possibilities:

    • Eliminate idle power drawn by devices that are off or in standby
    • Turn devices on/ off via the free Smartenit app from your phone, tablet, or web browser
    • Use our app to control appliances based on schedules or condition of other devices.
  • Sale!

    EZX10RF - Model # 5010G

    Home automation devices that speak different languages often can't communicate with each other.  A translator like EZX10RF means these devices can start talking to each other.  It's the perfect bridge between X10 RF signals and Insteon so your home control network can become a little more connected.

    Smart Possibilities

    • Use your key fob to control the lights in your house, so you don't have to walk into a dark house at night
    • Trigger Insteon controlled lights with your X10 motion sensors
    • Have access to your Insteon controlled irrigation system via a handy X10 controller
    Product appearance may be different than what is shown. 
  • ActiveEye - Model # MS16A

    Your home control system increases its intelligence the more incoming data you can feed it.  This sensor detects motion indoors or outdoors and allows you to automatically trigger other devices, like lights and alarms, in response.  It makes for the perfect addition to your security or energy management system.

    Smart Possibilities:

    • Automatically trigger on/ off devices like light controls when motion is detected
    • Turn on lights inside when your car pulls into the garage so you don't have to enter a dark house
    • Trigger lights on/ off based on ambient light levels
  • Sale!

    ZBMS3 - Model # 1019C

    Your home control system becomes more intelligent the more data from the real world you can feed it.  ZBMS3 really smartens up your system by providing information on motion, temperature, and ambient light that can then be used to influence other devices.  Easily trigger devices such as lights or alarms based on motion, with this perfect addition to your security or energy management system.

    Smart Possibilities:

    • Automatically trigger on/ off devices like light controls when motion is detected
    • Receive reports on your phone, tablet, or web browser when unexpected motion is detected in your system while you're out
    • Turn on lights when driving into the garage so you don't have to enter a dark house
    • Saves energy and only turns lights on if ambient light level is below user set threshold