• Sale!

    ZBMLC30 - Model # 4040B

    Remotely control and monitor up to two of your larger energy-consuming appliances with this wireless 30A load switch.  Suited for indoor or outdoor control of pool pumps, water heaters, and electric dryers, the device also lets you see on/off status and energy consumption.  Set schedules and get alerts about large energy consumers before they drive up your energy bill.
  • ZBMLCSR - Model # 4040C-xx

    Remotely control and monitor your larger energy-consuming appliances and include them in intelligent energy management with a ZBMLCSR wireless load switch.  Perfectly suited for pool pump control and electric heater management, the device also lets you see load status and energy consumption.  Use with your home automation or IoT control system and set schedules and get alerts about large energy consumers before they drive up your energy bill. This device is available in either a Normally Open (load will remain de-energized in the event of a device failure) or Normally Closed (load will stay energized) configuration.  Choose a preferred protocol among Zigbee, WiFi and LoRa. For a dual load version, see our ZBMLC30

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Let your water heater operate when electricity is at the lowest cost
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
  • Sale!

    ZBMLC15 - Model # 4034A

    Monitor and control appliances, overhead lights, ceiling fans, and more all from behind a switch or outlet, or anywhere.  This load controller smartens any switch, outlet, or fixture with energy metering (usable range 30-2,500 Watts), all while remaining hidden.  Use one of our gateways or any ZigBee HA compatible controller to remotely access connected lights or appliances and to control them based on their energy consumption.

    Smart Possibilities:

    • Eliminate idle power drawn by devices that are off or on standby
    • Trigger lights with motion sensors
    • Turn on ceiling fans when rooms get to a certain temperature
    • Use your lights to make it look like you're home when you're away
  • Metering Smart Plug # 5010Q (zigbee HA) and 5010P (zigbee SEP 1.x)

    Monitor and control lamps and appliances right from your phone, tablet, or web browser.  This smart plug tracks energy consumption data while also allowing remote on/off control for complete appliance energy management.  Use to fight "Vampire Power" (power drawn by some appliances even when they are not on)  and to eliminate idle power waste.

    Smart Possibilities:

    • Turn devices on/ off via the free Smartenit app from your phone, tablet, or web browser
    • Use our app to control appliances based on schedules or condition of other devices
    • Connect an appliance to a utility Smart Meter for demand response programs (SEP 1.x version)
    • Keep track of energy consumption and power quality
  • Smartenit IoTeMtr energy meter Smartenit Energy Meter

    Smart, Multi-Channel Three/Split/Single-Phase Energy Meter Model #3017

    This versatile multi-channel wireless (zigbee, WiFi or LoRa) meter is configurable to measure two 3-phase circuits, three split-phase circuits or six single phase circuits.  Parameters including voltage, frequency, current, power and active/reactive energy imported or exported are read wirelessly with a local hub/gateway or through a WiFi router that connects to a cloud service. The six current sampling channels are set up for CTs with a 0-333mV output range for flexible CT choices.  Supported by the Smartenit mobile and web apps for powerful energy management functionality.
  • Sale!

    EZX10RF - Model # 5010G

    Home automation devices that speak different languages often can't communicate with each other.  A translator like EZX10RF means these devices can start talking to each other.  It's the perfect bridge between X10 RF signals and Insteon so your home control network can become a little more connected.

    Smart Possibilities

    • Use your key fob to control the lights in your house, so you don't have to walk into a dark house at night
    • Trigger Insteon controlled lights with your X10 motion sensors
    • Have access to your Insteon controlled irrigation system via a handy X10 controller
    Product appearance may be different than what is shown. 
  • ActiveEye - Model # MS16A

    Your home control system increases its intelligence the more incoming data you can feed it.  This sensor detects motion indoors or outdoors and allows you to automatically trigger other devices, like lights and alarms, in response.  It makes for the perfect addition to your security or energy management system.

    Smart Possibilities:

    • Automatically trigger on/ off devices like light controls when motion is detected
    • Turn on lights inside when your car pulls into the garage so you don't have to enter a dark house
    • Trigger lights on/ off based on ambient light levels
  • Sale!

    ZBMS3 - Model # 1019C

    Your home control system becomes more intelligent the more data from the real world you can feed it.  ZBMS3 really smartens up your system by providing information on motion, temperature, and ambient light that can then be used to influence other devices.  Easily trigger devices such as lights or alarms based on motion, with this perfect addition to your security or energy management system.

    Smart Possibilities:

    • Automatically trigger on/ off devices like light controls when motion is detected
    • Receive reports on your phone, tablet, or web browser when unexpected motion is detected in your system while you're out
    • Turn on lights when driving into the garage so you don't have to enter a dark house
    • Saves energy and only turns lights on if ambient light level is below user set threshold
  • ZBWDS - Model # 1017A

    You can use this Zigbee HA (Home Automation Profile) wireless sensor to monitor doors, cabinets, and windows.  It wirelessly reports a change in status to your Smartenit Gateway so you can receive messages right on you smartphone, tablet, or computer when anything is opened or closed!

    Smart Possibilities

    • Receive an alert when your storage unit is opened
    • Know that your teenage safely got home from school and walked in the front door
    • Turn on lights automatically when you open your door to come home
  • ZBMS3-1 - Model # 1019D

    Your home control system becomes more intelligent the more data from the real world you can feed it. ZBMS3-1 really smartens up your system by providing information on motion, temperature, and ambient light that can then be used to influence other devices. Easily trigger devices such as lights or alarms based on motion, with this perfect addition to your monitoring or energy management system.

    Smart Possibilities:

    • Automatically trigger on/ off devices like light controls when motion is detected
    • Receive reports on your phone, tablet, or web browser via our Smartenit app, when unexpected motion is detected in your system while you're out
    • Turn on lights when driving into the garage so you don't have to enter a dark house
    • Saves energy and only turns lights on if ambient light level is below user set threshold
    • Know the temperature in a room
  • 4-Unit X10 Credit Card Controller

    This simple controller puts the power of home automation control right in your hands.  It sends out X10 RF commands that can be be used to control INSTEON devices with our EZX10RF.  In a Smartenit system you can use it to activate lights, appliances, A/ V equipment and even irrigation zones.
  • ZBRE-U - Model # 2012x

    Use this range extender to ensure home automation devices reliably communicate with each other.  By routing weaker messages, the ZBRE-U boosts the overall coverage of your home control network, ensuring robust communication, and eliminating dead zones.  It also helps network expansion by allowing other devices located further from the network controller to join the network. Works with most Zigbee hubs including Smartenit, SmartThings, Hubitat, Tuya, Alexa Echo Plus and Control4 (free diver provided).
    Please choose the right version below.  HA is for common home automation hubs such as Smartenit, SmartThings, Hubitat, etc.  SEP 1.x is for HAN (Home Area Network) where the utility smart meter is usually the coordinator/hub.
  • ZBWS3B - Model # 4037A

    This convenient wireless 3 button switch puts your home or building's automation control points within reach at any time.  Control elements like lights, small appliances, pool motors, irrigation zones and more with this versatile controller.  Battery powered, it can be wall mounted or kept free, for use at your convenience.

    Smart Possibilities:

    • Turn on your recirculating pump before you take a shower for instant hot water
    • Turn off your kitchen appliances with one button for a quick exit in the morning
    • Quickly override your pool pump's schedule for adjustments on the fly
  • Smartenit Harmony P2 Smartenit Harmony P2

    Harmony P2 Smart Hub, For Use with Zigbee, WiFi and Insteon Smart Products, Compatible with Google Assistant and Alexa - Model # 6007C

    Monitor and control anything, from anywhere with this versatile home automation hub / gateway.  The device is the "brain" of a connected home system that allows monitoring and control of lights, irrigation systems, security cameras, pool motors, and more while receiving event notifications on your phone, tablet, or web browser.  All automation control logic resides in the gateway allowing your home automation system to operate without a cloud service.  Our powerful set of apps (mobile and web) put control in a smart phone, tablet or PC.  Compatible with a large ecosystem of devices from hundreds of manufacturers, the hub enables voice control through Google Assistant or Amazon Alexa.
  • ZOE-MLC1 - Model # 4040A

    Extend energy management and remotely monitor and control up to two of your largest energy-consuming appliances with a ZOE-MLC1.  Perfectly suited for dual-speed pool pump control and electric heater management, it also provides load status and energy consumption.  It even comes ready to participate in Energy Utility rebate programs.  Set schedules and get alerts when energy consumption surpasses user set thresholds before they drive up your energy bill.

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
    • Participate in your energy utility's demand response programs and get rebates on your energy bill
  • ZBALRM Model # 1021A

    Add sound and visual alerts to your Zigbee home security with the ZBALRM Siren/Strobe Warning Device.  The Warning Device has four distinct alert sounds (fire alert, emergency alert, burglar alert, and doorbell) that can be activated by other Zigbee devices like our ZBMS3 3-button switch or ZBALRMB doorbell ringer.  The Warning Device is powered by an AC adapter (with 3 AAA batteries for backup) and includes an anti-tamper feature. As a Zigbee device it acts as a router and helps extend the network range and robustness.

    Smart Possibilities

    • Deter intruders with a loud intruder alert when a zone trips in your Zigbee security system
    • Get a pleasant chime sound and create an event in your automation system by pairing with our ZBALRMB pushbutton switch. Event can also be used to activate outdoor lights or video camera feeds
    • Activate a visual alarm if your ZBMS3 motion sensor detects motion at certain times
    • Prevent major water damage by having the siren alert you when a liquid sensor like our ZBLIQS is tripped

Title

Go to Top