• Out of stock

    EZFlora is replaced by Rainbee8 which operates the same as the EZFlora and adds even more functionality.

    EZFlora - Model # 5010A

    You can monitor and control your irrigation system from anywhere with the EZFlora irrigation controller.  Independent control over each sprinkler zone as well as the ability to create programs, gives you maximum flexibility.  It can even respond directly to rain or water flow sensors so you can smartly manage your water use.

    Smart Possibilities:

    • Make irrigation schedules based on local sunrise or sunset to minimize evaporation loss
    • Stop your irrigation from running when it rains
    • Get alerts about a leak in your system right on your phone, tablet, or web browser

    Add Ons:

    • A 24 V AC transformer is required to power the sprinkler valves.  You can add one from the Smartenit store for $14.99 HERE.
  • Harmony G2 Smart Hub, For Use with Zigbee, WiFi, LoRa and Insteon Smart Products, Compatible with Google Assistant and Alexa – Model # 6007E

    Monitor and control anything, from anywhere and without costly subscriptions to "cloud services" with this versatile hub / gateway as the “brain” of a home automation system.  Groups lights, irrigation systems, security cameras, pool motors, and more through our powerful and function-packed apps on your phone, tablet, or web browser.   Compatible with devices from many manufacturers, and voice control enabled through Google Assistant and Amazon Alexa. Note to those of you affected by the sudden end of the Smarthome hub cloud service: Our Harmony G2 Gateway/Hub is a multi-protocol device that may include a built-in zigbee interface.  It IS NOT a direct replacement for the Insteon hub and DOES NOT include an Insteon PLM interface. To support Insteon and X10, you must select the option to add the PLM.  As a hub, our G2 works as a stand alone device (all local connectivity and control, not cloud dependent), as well as, over the internet with our cloud server for remote and voice control compatible with Alexa and Google Home.  Migrating Insteon devices will require writing links to the PLM through our app so your devices will not need to be factory reset. Please read the quick guide and information on the App.  Our supply of PLMs is limited and we reserve the option of sending a refurbished unit covered by our standard warranty.  We are investigating solutions to help.  (See Resources tab below for the Quick Start Guide and helpful information for X10 users.) Additionally, I/O Linc and FanLinc are not supported by our App at this time. We are working to add them and expect completion by end of June. This will be updated once they are added. Please consider this before purchasing. If you have questions, please do not call but email sales@smartenit.com.
  • Out of stock
    Sale!

    ZBMLC30 - Model # 4040B

    Remotely control and monitor up to two of your larger energy-consuming appliances with this wireless 30A load switch.  Suited for indoor or outdoor control of pool pumps, water heaters, and electric dryers, the device also lets you see on/off status and energy consumption.  Set schedules and get alerts about large energy consumers before they drive up your energy bill.
  • Out of stock

    RainBee8 - Model # 5010Z

    You can monitor and control your irrigation system from anywhere with the RainBee8 irrigation controller via Insteon/X10 or Zigbee.  Independent control over each sprinkler zone, as well as the ability to create programs, gives you maximum flexibility.  It can even respond directly to rain or water flow sensors so you can smartly manage your water use.

    Smart Possibilities:

    • Make irrigation schedules based on local sunrise or sunset to minimize evaporation loss
    • Get notified of possible sprinkler head leak when consumption is too high
    • Easily adjust timers from your smart phone if weather takes a sudden turn
    Product appearance may be different than what is shown. Rainbee8 functions the same as EZFlora and includes communication via Zigbee. 

    Add Ons:

    • A 24 V AC transformer is required to power the sprinkler valves.  You can add one from the Smartenit store for $14.99 HERE.
  • ZBMLCSR - Model # 4040C-xx

    Remotely control and monitor your larger energy-consuming appliances and include them in intelligent energy management with a ZBMLCSR wireless load switch.  Perfectly suited for pool pump control and electric heater management, the device also lets you see load status and energy consumption.  Use with your home automation or IoT control system and set schedules and get alerts about large energy consumers before they drive up your energy bill. This device is available in either a Normally Open (load will remain de-energized in the event of a device failure) or Normally Closed (load will stay energized) configuration.  Choose a preferred protocol among Zigbee, WiFi and LoRa. For a dual load version, see our ZBMLC30

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Let your water heater operate when electricity is at the lowest cost
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
  • ZOE-MLC1 - Model # 4040A

    Extend energy management and remotely monitor and control up to two of your largest energy-consuming appliances with a ZOE-MLC1.  Perfectly suited for dual-speed pool pump control and electric heater management, it also provides load status and energy consumption.  It even comes ready to participate in Energy Utility rebate programs.  Set schedules and get alerts when energy consumption surpasses user set thresholds before they drive up your energy bill.

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
    • Participate in your energy utility's demand response programs and get rebates on your energy bill
  • Smart L1/L2 16A/30A EV Charging Station, Compatible With ev.energy App

    Small and mighty: with a footprint of just 4.5" X 3.5", SmartElek is a fully safety certified EVSE that includes advanced wireless connectivity including OCPP 1.6J for operation with residential and commercial automation systems. Simply download the ev.energy mobile app here to get started. Please see below for an up-to-date list of utilities offering a rebate.
  • Sale!

    Smart L1/L2 16A/30A EV Charging Station, Stand-Alone or Networked Operation

    Small and mighty: with a footprint of just 4.5" X 3.5", SmartElek is a fully safety certified EVSE that includes advanced wireless connectivity including OCPP 1.6J for operation with residential and commercial automation systems. Works with our free mobile and web apps with or without a home automation hub. Compatible with SmartThings and Control4. Built-in software for autonomous load balancing operation in EVSE clusters.  

Title

Go to Top