• Sale!

    Smart L1/L2 16A/30A EV Charging Station, Stand-Alone or Networked Operation

    Small and mighty: with a footprint of just 4.5" X 3.5", SmartElek is a fully safety certified EVSE that includes advanced wireless connectivity including OCPP 1.6J for operation with residential and commercial automation systems. Works with our free mobile and web apps with or without a home automation hub. Compatible with SmartThings and Control4. Built-in software for autonomous load balancing operation in EVSE clusters.  
  • PLUG12

    $4.25

    12-Position Pluggable Terminal

    Connect wired sensors, irrigation valves, and more to our EZFlora and EZIO devices for a responsive home control system.  Note that this is a replacement as your EZFlora and EZIO devices come standard with this connector already.
  • ZBVC-1 - Model # 1023A

    This wireless valve controller easily installs onto existing ball valves to give you remote control over your water or gas lines.  You can monitor and control your valves from your phone, tablet, or computer.  You can even set schedules to limit consumption and close or open valves based on sensors, preventing a small leak from becoming a big problem.

    Smart Possibilities

    • Easily close your water line before you go on vacation to prevent potential disaster
    • Open your water line only when you need water for irrigation etc.
    • Shut off your water automatically if you detect a leak with our ZBLIQS leak sensor
  • ZBMLCSR - Model # 4040C-xx

    Remotely control and monitor your larger energy-consuming appliances and include them in intelligent energy management with a ZBMLCSR wireless load switch.  Perfectly suited for pool pump control and electric heater management, the device also lets you see load status and energy consumption.  Use with your home automation or IoT control system and set schedules and get alerts about large energy consumers before they drive up your energy bill. This device is available in either a Normally Open (load will remain de-energized in the event of a device failure) or Normally Closed (load will stay energized) configuration.  Choose a preferred protocol among Zigbee, WiFi and LoRa. For a dual load version, see our ZBMLC30

    Smart Possibilities:

    • Turn on/ off large devices from anywhere
    • Monitor energy consumption at the appliance level
    • Let your water heater operate when electricity is at the lowest cost
    • Run your pool pump when it's most energy efficient and least costly
    • Have large appliances respond to other events in your system
  • This UL recognized 12 volt DC @1A power supply is used with Smartenit's EZIO8SA/PLM Combo and the IoT8-Z.  It can also be used with any other device having the same 2.1mm plug and 3.5mm barrel socket and power specifications.
  • RainBee16 - Model # 3016A

    Maximize water and energy efficiency by using your irrigation system only when you want and need it.  RainBee16 lets you flexibly monitor and control up to 16 sprinkler zones independently.  Integrating irrigation into your connected home allows you to incorporate sensors, set up customized programs, and set schedules, all  from your phone, tablet, or web browser.

    Smart Possibilities:

    • Access your irrigation system from anywhere
    • Set up watering schedules based on sunrise or sunset
    • Enable/disable irrigation using Automation Rules in the Smartenit App

    Add Ons:

    • A 24 V AC transformer is required to power the RainBee16 and your sprinkler valves.  You can add one from the Smartenit store for $14.99 HERE.
  • ZBALRM Model # 1021A

    Add sound and visual alerts to your Zigbee home security with the ZBALRM Siren/Strobe Warning Device.  The Warning Device has four distinct alert sounds (fire alert, emergency alert, burglar alert, and doorbell) that can be activated by other Zigbee devices like our ZBMS3 3-button switch or ZBALRMB doorbell ringer.  The Warning Device is powered by an AC adapter (with 3 AAA batteries for backup) and includes an anti-tamper feature. As a Zigbee device it acts as a router and helps extend the network range and robustness.

    Smart Possibilities

    • Deter intruders with a loud intruder alert when a zone trips in your Zigbee security system
    • Get a pleasant chime sound and create an event in your automation system by pairing with our ZBALRMB pushbutton switch. Event can also be used to activate outdoor lights or video camera feeds
    • Activate a visual alarm if your ZBMS3 motion sensor detects motion at certain times
    • Prevent major water damage by having the siren alert you when a liquid sensor like our ZBLIQS is tripped
  • EZEye, Model #1011A

    You can accurately detect daytime and nighttime transitions with the EZEye sensor and automatically trigger other devices on your home control system in response.  It accurately measures ambient light levels, letting you set thresholds for devices like overhead lighting, automatic drapes, and more.  You can protect light sensitive objects, promote growing conditions for indoor plants and have a super responsive home theater setup.

    Smart Possibilities:

    • Make sure your teenager gets up in the morning by opening their drapes to let in some sun
    • Close your shades in rooms with light sensitive furniture or devices
    • Turn on lights automatically when ambient light falls to a certain level
  • ZBWDS - Model # 1017A

    You can use this Zigbee HA (Home Automation Profile) wireless sensor to monitor doors, cabinets, and windows.  It wirelessly reports a change in status to your Smartenit Gateway so you can receive messages right on you smartphone, tablet, or computer when anything is opened or closed!

    Smart Possibilities

    • Receive an alert when your storage unit is opened
    • Know that your teenage safely got home from school and walked in the front door
    • Turn on lights automatically when you open your door to come home
  • ZBRE-U - Model # 2012x

    Use this range extender to ensure home automation devices reliably communicate with each other.  By routing weaker messages, the ZBRE-U boosts the overall coverage of your home control network, ensuring robust communication, and eliminating dead zones.  It also helps network expansion by allowing other devices located further from the network controller to join the network. Works with most Zigbee hubs including Smartenit, SmartThings, Hubitat, Tuya, Alexa Echo Plus and Control4 (free diver provided).
    Please choose the right version below.  HA is for common home automation hubs such as Smartenit, SmartThings, Hubitat, etc.  SEP 1.x is for HAN (Home Area Network) where the utility smart meter is usually the coordinator/hub.
  • Out of stock
    Sale!

    ZBMLC30 - Model # 4040B

    Remotely control and monitor up to two of your larger energy-consuming appliances with this wireless 30A load switch.  Suited for indoor or outdoor control of pool pumps, water heaters, and electric dryers, the device also lets you see on/off status and energy consumption.  Set schedules and get alerts about large energy consumers before they drive up your energy bill.
  • Out of stock
    Sale!
    Smartenit EZIO8SA I/O Controller

    EZIO8SA - Model # 3011A - Requires Serial PLM which are out of stock. EZIO8SA out of Stock

    For wireless multi-protocol and enhanced operation see our IoT8-Z

    Controls (switches on/off) up to 8 electrical loads (lighting, irrigation, garage door openers, HVAC dampers, alarms, etc.) through 3-Amp Form-C relays. Includes 4 digital and 2 analog inputs to monitor external signals from switch closures, analog sensors, digital sensors, motion detectors, liquid sensors, etc. This variety of inputs and outputs enable many applications such as:
    • Trigger lamps and overhead lights in response to detected motion
    • Use INSTEON keypads or switches to control multiple non-INSTEON devices
    • Remotely manage and monitor a 2-car garage
  • Out of stock

    EZIComm - Model # 5010K

    This powerline modem interface via RS232 (RS485 option available) or USB and utilizes the Insteon and X10 protocols to monitor and control home elements like lighting, security, HVAC systems, and more.  Works with a number of home automation software packages including our free iSmartenit app so you can access your system from a phone, tablet, or web browser.

    Smart Possibilities

    • Control and manage your irrigation system from your phone
    • Automatically trigger your lights in response to motion sensors being tripped
    • Turn on indoor lights when your garage door opens so you aren't left in the dark

    Please Note:  These are out of stock and discontinued. If you wish to purchase the USB version 2412U, you can find it here on ebay. It is a powerline only PLM (with a pass-through outlet) and appears different than the picture shown.

  • IoT8-Z - Model # 3012A Multi-protocol Input Output Controller

    Controls electrical loads (lighting, irrigation valves, garage door openers, HVAC dampers, alarms, etc.) through 8 separate 3-Amp Form-C relays, and connects to all types of wired sensors through 4 digital and 2 analog inputs. Enables many applications such as:
    • Irrigation and outdoor landscape lighting for the perfect smart yard
    • Automated pool water circulation pumps and lighting
    • Automated water system in a rural residence (well pump, reservoir tank, booster pump)
    • Control of "non-smart" devices through home automation apps, voice assistants, keypads or switches
    • Remote management and monitoring of a multi-car garage (doors, parking sensors, alarms, etc.
  • Breakout RJ45 Connector

    Directly interface your EZFlora irrigation controller with a number of rain, soil moisture, and water flow sensors for a truly responsive irrigation system.  You ensure that your lawn, garden, and crops get water only when they need it.  Reduce your water and energy consumption and eliminate waste with this simple add on.

    Smart Possibilities

    • Set system overrides that prevent irrigation when your rain sensors detect significant rainfall
    • Use water flow meters to alert you if a pipe bursts somewhere in your system
    • Track your total water use right from your phone, tablet or web browser to get an accurate estimate of your water bill
  • Use this power source with our EZFlora or RainBee16 for the ability to monitor and control your irrigation system from anywhere.
  • Sale!

    ZBMLC15 - Model # 4034A

    Monitor and control appliances, overhead lights, ceiling fans, and more all from behind a switch or outlet, or anywhere.  This load controller smartens any switch, outlet, or fixture with energy metering (usable range 30-2,500 Watts), all while remaining hidden.  Use one of our gateways or any ZigBee HA compatible controller to remotely access connected lights or appliances and to control them based on their energy consumption.

    Smart Possibilities:

    • Eliminate idle power drawn by devices that are off or on standby
    • Trigger lights with motion sensors
    • Turn on ceiling fans when rooms get to a certain temperature
    • Use your lights to make it look like you're home when you're away
  • Sale!

    ZBMSKT1- Model # 4035A

    Remotely controlled outlet allows on/off switching of lamps and appliances from phone, tablet, or web browser.  The ZBMSKT1 also measures energy consumption plus other electrical parameters like voltage, current, frequency and power factor to integrate appliances into smart Zigbee energy management systems.  Many energy saving programs can be implemented including load scheduling, activating at times of lowest energy cost, fighting “Vampire Power” (power drawn by some appliances even when they are off) and controlling the appliance in response to the behavior of other connected devices.

    Smart Possibilities

    • Eliminate idle power drawn by devices that are OFF or in standby
    • Turn devices ON/OFF via the free Smartenit app from your phone, tablet, web browser
    • Set schedules based on time and sunset/sunrise
    • Turn off appliance when energy threshold is reached
    • Monitor power consumption and predict monthly energy bills
  • Harmony G2 Smart Hub, For Use with Zigbee, WiFi, LoRa and Insteon Smart Products, Compatible with Google Assistant and Alexa – Model # 6007E

    Monitor and control anything, from anywhere and without costly subscriptions to "cloud services" with this versatile hub / gateway as the “brain” of a home automation system.  Groups lights, irrigation systems, security cameras, pool motors, and more through our powerful and function-packed apps on your phone, tablet, or web browser.   Compatible with devices from many manufacturers, and voice control enabled through Google Assistant and Amazon Alexa. Note to those of you affected by the sudden end of the Smarthome hub cloud service: Our Harmony G2 Gateway/Hub is a multi-protocol device that may include a built-in zigbee interface.  It IS NOT a direct replacement for the Insteon hub and DOES NOT include an Insteon PLM interface. To support Insteon and X10, you must select the option to add the PLM.  As a hub, our G2 works as a stand alone device (all local connectivity and control, not cloud dependent), as well as, over the internet with our cloud server for remote and voice control compatible with Alexa and Google Home.  Migrating Insteon devices will require writing links to the PLM through our app so your devices will not need to be factory reset. Please read the quick guide and information on the App.  Our supply of PLMs is limited and we reserve the option of sending a refurbished unit covered by our standard warranty.  We are investigating solutions to help.  (See Resources tab below for the Quick Start Guide and helpful information for X10 users.) Additionally, I/O Linc and FanLinc are not supported by our App at this time. We are working to add them and expect completion by end of June. This will be updated once they are added. Please consider this before purchasing. If you have questions, please do not call but email sales@smartenit.com.
  • Send us your tired, your poor, your huddled masses of Smartenit home automation devices that are no longer covered under a Smartenit warranty.  We will quickly diagnose, repair, and upgrade them promptly so you can get back to automating! Note: please email support@smartenit.com if you are looking to repair or replace an Insteon PLM based device. A simple note describing what the issue is will help us to determine whether we can be of service due to the discontinuance of PLMs. 

Title

Go to Top