- Replaces* the EZIO4O AND adds WiFi connectivity!
- Compatible with Amazon Alexa and Google Assistant when used with our gateway
- Simple and rapid installation
- Four general purpose Form-C relays (N.O. and N.C. contacts rated .5A at 30VDC or 120VAC – resistive loads)
- Outputs respond individually or in any combination via WiFi, Insteon and X10 commands
- A timer from 1 second to 255 minutes can be set on each relay to allow momentary pulsing or unattended turn off
- Extensive command set for maximum programming flexibility
- Acts as a repeater of powerline Insteon signals
- 2-way communications for high reliability
- Smartenit app accessible (totally supported)
- 1-year Smartenit warranty
*Although functionally equivalent to the EZIO4O, the pinout changed for consistency across all products.
Product appearance may be different than that shown.
Details
IoT4R is a multi-load controller/switch that independently controls up to 4 different electrical loads. Small devices that operate using dry contact or other small power sources can be wired directly into the IoT4R output relays. These relays can be controlled directly by WiFi, Insteon or X10 signals from keyfobs, remote controllers or home automation apps. The IoT4R is fully supported by our Smartenit app via a Smartenit gateway or Cloud (WiFi), so its outputs are controllable from a phone, tablet, or web browser. The app allows the set up of custom automations based on time or the state of other devices in the home automation system.
Input/Output Comparison Chart
Products |
 |
 |
 |
Outputs |
EZIO2X4 |
IoT8 |
IoT4R |
Supported Protocols |
Insteon & X10 |
ZigBee & Insteon |
WiFi, Insteon and X10 |
Controls |
Each output can be linked to an Insteon group to be controlled by an Insteon scene controller (Ex. Keypadlinc, Switchlinc, etc.) |
INSTEON ‘All-Link’ |
A snapshot of the outputs can be recalled with a single group command (i.e. respond to a switch or a button on a Keypadlinc, ControlLinc, etc.) |
|
|
Timers |
Timers from 1 second to 255 minutes can be set up to turn off each output |
# of Outputs |
2 |
8 |
4 |
Types |
Relays (normally open) |
Relays (both normally open and normally closed provided) |
Relays (both normally open and normally closed provided) |
Ratings |
30VDC/120VAC, 0.5A |
24VDC/120VAC, 3A |
30VDC/120VAC, 0.5A |
Output Uses |
General purpose contact closures of small loads limited by relay voltage and current rating. |
General purpose contact closure of larger loads limited by relay voltage and current rating. |
General purpose contact closures of small loads limited by relay voltage and current rating. |
Inputs |
EZIO2X4 |
IoT8 |
IoT4R |
Controls |
For the digital (opto isolated) inputs, each input is ON when when current flows through the input or OFF when current is absent. Changes from OFF to ON and from ON to OFF can be used to control other ZigBee or Insteon devices. For analog inputs, voltage levels translate to points and On/Off transitions can be regulated by programmable trip points thresholds. |
Timers |
Delayed OFF commands (from 1 to 255 minutes) programmable on each input. This timer resets (starts over) if a new ON command is received. |
# of Inputs |
4 |
6 |
None |
Inputs Type |
2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC) |
4 Opto-isolated (3-30VDC), 2 digital or analog (0-3VDC) |
N/A |
Uses |
Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. |
Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. |
N/A |
Insteon Links |
31 |
More than 512 (external PLM) |
31 |