Wireless X10 All-House / Insteon Transceiver


EZX10RF – Model # 5010G

Home automation devices that speak different languages often can’t communicate with each other.  A translator like EZX10RF means these devices can start talking to each other.  It’s the perfect bridge between X10 RF signals and Insteon so your home control network can become a little more connected.

Smart Possibilities

  • Use your key fob to control the lights in your house, so you don’t have to walk into a dark house at night
  • Trigger Insteon controlled lights with your X10 motion sensors
  • Have access to your Insteon controlled irrigation system via a handy X10 controller

Product appearance may be different than what is shown. 


  • Receives X10RF signals and puts them out onto the powerline
  • Receives X10RF signals and then transmits Insteon commands
  • External antenna gives it range of 200 feet for receiving X10RF signals
  • Recognizes all 256 house/unit X10 addresses and re-sends those from RF wireless units over the powerline
  • Can learn and use up to 20 unique X10RF codes to trigger Insteon devices
  • Timers can be set up on each address to send an OFF command automatically from .5 to 15.5 minutes after the ON command is received
  • Totally configurable over the Insteon network through PC or web based applications
  • 1 year Smartenit warranty


EZx10RF is a transceiver that allows you to put X10RF signals onto the powerline and also translate X10 signals into Insteon commands, greatly expanding your home automation network possibilities.  Your X10RF transmitters like keypads, motion sensors, driveway alerts, panic buttons and more can now be used to control X10 powerline modules.  In addition you can use these same simple X10 transmitters to trigger reliable Insteon commands.  The EZX10RF “learns” up to 20 unique X10 codes you can use to trigger individual or groups of Insteon devices.  Installation and setup is easy and configuration is achieved through a number of PC or web-based applications.  What were once devices working on two completely different systems now become part of a harmonious whole.  Simply put, this  transceiver gets you one step closer to a truly connected home.

Additional information

Weight .75 lbs
Dimensions 5.75 × 4.25 × 3.5 in


User Guides


Smartenit Product Number EZX10RF All-House X10 Transceiver and Insteon Bridge #5010G
Warranty 1 year
Status LED (on the PLM) White or Blue
Setup Memory Non-volatile EEPROM
INSTEON Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 30
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vppinto 5 Ohms
INSTEON Minimum Receive Level 10 mVppnominal
INSTEON Messages Repeated Yes
X10 Features
X10 Primary Address None needed for operation
X10 Powerline Frequency 121 KHz
X10 Minimum Transmit Level 3.2 Vppinto 5 Ohms
X10 Minimum Receive Level 20 mVppnominal
X10 Messages Repeated No
Operating Conditions Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions 4.0″ H x 2.5″ W x 1.5″ D
Weight 5 oz
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Plug 3-pin grounded
Pass-through Outlet 3-pin grounded
Certification Safety tested for use in USA and Canada (ETL #3101636)

You may also like…


Go to Top