8-Zone INSTEON/X10 Irrigation Controller


Out of stock

EZFlora is replaced by Rainbee8 which operates the same as the EZFlora and adds even more functionality.

EZFlora – Model # 5010A

You can monitor and control your irrigation system from anywhere with the EZFlora irrigation controller.  Independent control over each sprinkler zone as well as the ability to create programs, gives you maximum flexibility.  It can even respond directly to rain or water flow sensors so you can smartly manage your water use.

Smart Possibilities:

  • Make irrigation schedules based on local sunrise or sunset to minimize evaporation loss
  • Stop your irrigation from running when it rains
  • Get alerts about a leak in your system right on your phone, tablet, or web browser

Add Ons:

  • A 24 V AC transformer is required to power the sprinkler valves.  You can add one from the Smartenit store for $14.99 HERE.

Out of stock


  • INSTEON technology for powerline communication
  • Drives standard 24 VAC sprinkler valves
  • Zone #8 may be programmed to drive an auxiliary pump. This pump would go ON anytime any of the irrigation valves are ON
  • 8 zones rated at 500 mA per zone – designed to operate 1 zone at a time.
  • Memorizes up to 4 program sequences, which can be recalled via a single INSTEON or X10 command
  • PLM has pass-through outlet (not shown in picture)
  • Interfaces directly with rain and water flow sensors
  • Smartenit accessible
  • 1 year Smartenit warranty


EZFlora is an INSTEON irrigation controller that lets you manage your irrigation system from anywhere with maximum flexibility.  Its independent control over 8 sprinkler zones provides effective water management by watering only when your lawn, garden, or crops need it.  You have access to your system from your phone, tablet, or web browser with the Smartenit app, allowing pinpoint control over individual zones, programs, and schedules.  It memorizes up to 4 individual programs that can be run with a single command.  Large properties are no problem, as one of EZFlora’s outputs can manage a booster pump.  In addition, EZFlora can directly interface with sensors detecting rain, soil moisture, and water consumption, meaning you can create a truly responsive irrigation system.  Including your irrigation in your home control system will end up saving you a lot of water and money!

Additional information

Weight 1.1 lbs
Dimensions 5.75 × 4.25 × 3.5 in


Smartenit Product Number EZFlora – INSTEON/X10 Irrigation Controller – #5010A
Warranty 1 year
Status LED White or Blue
Setup Memory Non-volatile EEPROM
INSTEON Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 417
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vppinto 5 Ohms
INSTEON Minimum Receive Level 10 mVppnominal
INSTEON Messages Repeated Yes
X10 Features
X10 Primary Address 1 optional (comes unassigned and uses all units in a house code)
X10 Powerline Frequency 121 KHz
X10 Minimum Transmit Level 3.2 Vppinto 5 Ohms
X10 Minimum Receive Level 20 mVppnominal
X10 Messages Repeated No
Operating Conditions Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions 4.0″ H x 2.5″ W x 1.5″ D (excluding external valve connector)
Weight 5 oz
Zone Output Rating .5 Amp
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Plug 3-pin grounded
Pass-through Outlet 3-pin grounded
Certification Safety tested for use in USA and Canada (ETL #3101636)


User Guides

You may also like…


Go to Top