IoT4R – Model # 5010V

$104.99

4-Relay INSTEON/X10 Controller

You’ll be able to control up to 4 small devices from anywhere with this output device.  Things like garage doors, HVAC dampers, electric blinds, driveway gates and more can be managed from this single device using remote controls and keyfobs.  You can even trigger connected devices on your phone, tablet, or web browser including those devices in your larger home control system.

Smart Possibilities

  • Close HVAC dampers in response to temperature sensors
  • Open and close garage using your keyfob
  • Open driveway gates for arriving guests from you phone

Description

  • Functionally equivalent to and replaces* the EZIO4O, but now has WiFi controlability!
  • Compatible with Amazon Alexa and Google Assistant
  • Simple and rapid installation
  • Four general purpose relays (contacts rated .5A at 30VDC or 120VAC – resistive loads)
  • Outputs respond individually or in any combination to Insteon and X10 commands
  • A timer from 1 second to 255 minutes can be set on each relay to allow momentary pulsing or unattended turn off
  • Extensive command set for maximum programming flexibility
  • Acts as a repeater of powerline Insteon signals
  • 2-way communications for high reliability
  • Smartenit app accessible
  • 1-year Smartenit warranty

*Although functionally equivalent to the EZIO4O, the pinout has changed to be consistant across all products.

Product appearance may be different than what is shown.

 Details

IoT4R is a load controller that independently controls up to 4 different devices.  Small devices that operate using dry contact or other small power sources can be wired into the IoT4R’s outputs.  These outputs can be controlled directly by Insteon or X10 signals from a keyfob or other remote control.  In addition, IoT4R is supported on our Smartenit app so when it is part of a home automation system anchored by a Smartenit gateway, so you can trigger its outputs right from your phone, tablet, or web browser.  Through the app, you can even include IoT4R outputs in custom programs, responding to the status of other devices in your system.  This makes it possible to use home automation commands and elements to control simple, wired devices.  It gives you remote control over multiple devices at once, facilitating the setup of an energy efficient, cost-saving home control system.

Input/Output Comparison Chart

Products  
Outputs EZIO2X4 IoT8 IoT4R
Supported Protocols Insteon & X10 ZigBee & Insteon Insteon, X10 and WiFi
Controls Each output can be linked to an Insteon group to be controlled by an Insteon scene controller (Ex. Keypadlinc, Switchlinc, etc.)
INSTEON ‘All-Link’ A snapshot of the outputs can be recalled with a single group command (i.e. respond to a switch or a button on a Keypadlinc, ControlLinc, etc.)
Timers Timers from 1 second to 255 minutes can be set up to turn off each output
# of Outputs 2 8 4
Types Relays (normally open) Relays (both normally open and normally closed provided) Relays (both normally open and normally closed provided)
Ratings 30VDC/120VAC, 0.5A 24VDC/120VAC, 3A 30VDC/120VAC, 0.5A
Output Uses General purpose contact closures of small loads limited by relay voltage and current rating. General purpose contact closure of larger loads limited by relay voltage and current rating. General purpose contact closures of small loads limited by relay voltage and current rating.
Inputs EZIO2X4 IoT8 IoT4R
Controls For the digital (opto isolated) inputs, each input is ON when when current flows through the input or OFF when current is absent. Changes from OFF to ON and from ON to OFF can be used to control other ZigBee or Insteon devices. For analog inputs, voltage levels translate to points and On/Off transitions can be regulated by programmable trip points thresholds.
Timers Delayed OFF commands (from 1 to 255 minutes) programmable on each input. This timer resets (starts over) if a new ON command is received.
# of Inputs 4 6 None
Inputs Type 2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC) 4 Opto-isolated (3-30VDC), 2 digital or analog (0-3VDC) N/A
Uses Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. N/A
Insteon Links 31 More than 512 (external PLM) 31

Additional information

Weight 0.6 lbs
Dimensions 5.75 x 4.25 x 3.5 in

Resources

User Guides

Specifications

General
Smartenit Product Number IoT4R, #5010V, WiFi/Insteon/X10 Input/Output Module
Warranty 1 year
Operation
Status LED White or Blue
Setup Memory Non-volatile EEPROM – up to 30 links
Insteon Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 417
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vppinto 5 Ohms
INSTEON Minimum Receive Level 10 mVppnominal
INSTEON Messages Repeated Yes
X10 Features
X10 Primary Address 1 optional (requires entire House code – comes unassigned)
X10 Powerline Frequency 121 KHz
X10 Minimum Transmit Level 3.2 Vppinto 5 Ohms
X10 Minimum Receive Level 20 mVppnominal
X10 Messages Repeated No
Mechanical
Operating Conditions Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions 4.0″ H x 2.5″ W x 1.5″ D (excluding external valve connector)
Weight 5 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Plug 3-pin grounded
Pass-through Outlet 3-pin grounded
Certification Safety tested for use in USA and Canada (ETL #3101636)
Output Relays
Voltage Rating .5A @ 30VDC
.5A @ 120VAC

You may also like…