EZIO4O – Model # 5010J

$104.99

9 in stock

4-Relay INSTEON/X10 Controller

For similar features and functionality, check out our IoT4R – click here

You’ll be able to control up to 4 small devices from anywhere with this input/ output device.  Things like garage doors, HVAC dampers, electric blinds, driveway gates and more can be managed from this single device using remote controls and keyfobs.  You can even trigger connected devices on your phone, tablet, or web browser including those devices in your larger home control system.

Smart Possibilities

  • Close HVAC dampers in response to temperature sensors
  • Open and close garage using your keyfob
  • Open driveway gates for arriving guests from you phone

Product appearance may be different than what is shown.

9 in stock

Description

  • Simple and rapid installation
  • Four general purpose relays (contacts rated .5A at 30VDC or 120VAC – resistive loads)
  • Outputs respond individually or in any combination to INSTEON and X10 commands
  • A timer from 1 second to 255 minutes can be set on each relay to allow momentary pulsing or unattended turn off
  • Extensive command set for maximum programming flexibility
  • Acts as a repeater of powerline INSTEON signals
  • 2-way communications for high reliability
  • Equipped with usable pass-through outlet (not shown)
  • iSmartenit accessible
  • 1-year Smartenit warranty

Details

EZIO4O is a load controller that independently controls up to 4 different devices.  Small devices that operate using dry contact or other small power sources can be wired into the EZIO4O’s outputs.  These outputs can be controlled directly by INSTEON or X10 signals from a keyfob or other remote control.  In addition, EZIO4O is supported on our free iSmartenit app so when it is part of a home automation system anchored by a Smartenit gateway, so you can trigger its outputs right from your phone, tablet, or web browser.  Through the app, you can even include EZIO4O outputs in custom programs, responding to the status of other devices in your system.  This makes it possible to use home automation commands and elements to control simple, wired devices.  It gives you remote control over multiple devices at once, facilitating the setup of a energy efficient, cost-saving home control system.

EZIO Comparison Chart

Products EZIO2X4 EZIO8T- Model # EZIO8SA EZIO4O
Outputs EZIO2X4 EZIO8T EZIO8SA EZIO4O
Controls Each output can be linked to an INSTEON group (i.e. respond to a switch or a button on a Keypadlinc, Controllinc, etc.)
INSTEON ‘All-Link’ A snapshot of the outputs can be recalled with a single group command (i.e. respond to a switch or a button on a Keypadlinc, ControlLinc, etc.)
X10 Compatibility Outputs respond to X10 On/Off commands
Timers Timers from 1 second to 255 minutes can be set up to turn off each output
# of Outputs 2 8 8 4
Types Relays (normally open) Solid State Triacs (can only be used with low voltage AC currents) Relays (both normally open and normally closed provided) Relays (both normally open and normally closed provided)
Ratings 30VDC/120VAC, 0.5A 48VAC, 0.5A 24VDC/120VAC, 3A 30VDC/120VAC, 0.5A
Output Uses General purpose contact closures of small loads limited by relay voltage and current rating. Small AC loads such as sprinkler valves, HVAC relays, pool valves, door chimes, alarm horns, etc. General purpose contact closure of larger loads limited by relay voltage and current rating. General purpose contact closures of small loads limited by relay voltage and current rating.
Inputs EZIO2X4 EZIO8T EZIO8SA EZIO4O
Controls Each input is ON when a contact closes or when current flows (on opto-isolated type) or OFF in the opposite condition. Changes from OFF to ON and from ON to OFF trigger INSTEON Lights ON or lights OFF commands by default. On units with sensor inputs (Analog or 1-Wire), the programmable alarm points become the ON and OFF transitions.
Timers Delayed OFF commands (from 1 to 255 minutes) programmable on each input. This timer resets (starts over) if a new ON transition is detected.
# of Inputs 4 3 7 None
Inputs Type 2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC) All digital (0-5VDC). One input programmable as 1-Wire bus input for temperature sensor. 4 Opto-isolated (3-30VDC), 2 digital or analog (0-3VDC), 1 digital programmable as 1-Wire bus for temperature sensor. N/A
Uses Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. Contact closures, Digital DC sources (0-5VDC) 1-Wire temperature sensors. Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. 1-Wire temperature sensors. N/A
INSTEON Links 31 31 More than 512 (external PLM) 31

Additional information

Weight 0.6 lbs
Dimensions 5.75 x 4.25 x 3.5 in

You may also like…