Input/Output Controllers Comparison
| Products | EZIO2X4 |
IOT4R |
EZIO8SA |
IOT8-Z |
|
| Protocols | Insteon and X10 | Insteon, X10 and WiFi | Insteon and X10 | ZigBee, WiFi, LoRa and Insteon | |
| Outputs | 2 | 4 | 8 | ||
| Output Type | Relays (normally open) | Relays (both normally open and normally closed provided) | |||
| Relay Ratings | 30VDC/120VAC, 0.5A | 30VDC/120VAC, 0.5A | 24VDC/120VAC, 3A | ||
| Output Uses | General purpose contact closures (on/off control) of electrical loads limited by relay voltage and current ratings. | ||||
| Output Timers | Timers from 1 second to 255 minutes can be set up to automatically turn off an output upon receipt of an “On” command | ||||
| Controls | On and Off remote commands | ||||
| INSTEON Control | Each output can be linked to an Insteon group to be controlled by an Insteon scene controller (Ex. Keypadlinc, Switchlinc, etc.)
“All-Link”: A snapshot of the outputs can be recalled with a single group command (i.e. respond to a switch or a button on a Keypadlinc, ControlLinc, etc.) |
||||
| Inputs | 4 | None | 7 | 6 | |
| Input Type | 2 Opto-isolated (3-30VDC), 2 digital or analog (0-5VDC) | N/A | 4 Opto-isolated (3-30VDC), 2 digital or analog (0-3VDC) | ||
| Input Uses | Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. | N/A | Contact closures, Digital and Analog DC Voltage sources. Isolated outputs. | ||
| Input Detection | OFF to ON and ON to OFF transitions can be detected on digital inputs given the presence or absence of input voltage, or on analog inputs when a given voltage level is detected. For analog inputs, the voltage levels can also be read. | ||||
| Input Timers | Delayed OFF commands (from 1 to 255 minutes) programmable on each input. This timer resets (starts over) if a new ON command is received. | ||||
| Insteon Links | 31 | 31 | More than 512 (external PLM) | More than 512 | |
