Wizards not working with more than one item 2014-11-27T17:19:24+00:00

HOME Forums Gateways Harmony Gateway Wizards not working with more than one item

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Anonymous
    Post count: 3
    #40457 |

    I have been working with the wizards, and have not been able to get them to work properly if there is more than one action in the wizard. For example turn on several different insteon devices at a time. I have a very solid insteon mesh network, so signals shouldn’t be a problem. I have no problem with all of the devices turning on at the same time when using my old Controllinc. I can get a wizard to reliably turn a single device on or off, but not multiples. I finally created a wizard for each device, then staggered the on or off times by 20 seconds to get them to work reliably. I could probably use less of a delay, but that is what I finally tried and it worked.

    Ron

    Anonymous
    Post count: 259

    Hi Ron,

    Are you still having issues with multiple devices in the wizards?

    Regarding the delay, instead of 20 secs, try using just 1 or 2 secs and that should work.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.