Version 2.04 – now no response from EZServe 2009-08-22T13:36:07+00:00

HOME Forums Gateways EZSrve Version 2.04 – now no response from EZServe

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Anonymous
    Post count: 39
    #40206 |

    After installing v 2.04 the EZServe does not function. I installed using the Java installer. Now when trying the Java installer it does not discover the EZServe.

    Anonymous
    Post count: 39

    When installing I had forgotten to remove my static address. Afterwards I did the following:

    Please recover by resetting the unit. This is done by powering down, then pushing the side reset button 4-6 seconds into the boot-up process and holding the button until both LEDs in the ethernet socket light up. Then let go. The unit will boot again after clearing the flash.

    I actually did the resetting 3 times before the unit corrected itself. I then used the discovery tool and reinstalled 2.04. Everything needed to be reloaded, but function is good.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.