Unable to get SimpleHomeNet Utility to run 2014-04-25T03:49:59+00:00

HOME Forums Software SimpleHomeNet Utility Unable to get SimpleHomeNet Utility to run

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • Anonymous
    Post count: 6
    #40432 |

    I downloaded SHNU form sourceforge (2.0). I am able to launch SDM3. When I
    try to launch SimpleHomeNet Utility Suite, I get “The application failed to initialize
    properly (0xc0000135)”.

    I have a PLM connected to the serial port, and another connected to an EZIO8SA.

    I’m much more familiar with Mac OS than Windows.

    What am I doing wrong?

    Thanks for any help.

    XP, SP 2,

    Anonymous
    Post count: 1001

    SDM3 is used with the very old PLC. Not used with a PLM. Enter the port number of the serial port (probably 1).

    Anonymous
    Post count: 6

    Where do I enter that? The utility will not run. 🙁

    Anonymous
    Post count: 1001

    The first screen of the Utility should display. The COM port: input field is where the Serial port number is entered.

    If the first screen will not display perhaps the download was not successful. Can you post the all the messages that are displayed.

    Anonymous
    Post count: 192

    Did you pick the PLM interface choice on the first screen?
    If SDM3 is starting. It would indicate the older PLC interface was chosen.

    Anonymous
    Post count: 6

    The application never opens. All I get is:
    “The application failed to initialize properly (0xc0000135) Click on OK to terminate the application”
    The only button offered is OK.
    Windows kills the app.

    Anonymous
    Post count: 192

    The Simplehomenet utility on Soundforge is not the the latest. It is revision 2.0
    You may want to try the one on the Smartenit downloads page.
    http://www.simplehomenet.com/support.asp?page_id=supDownloads It is version 2.03a.

    I didn’t see a list of any other software needed to be on the computer. For the SHN Utility to run.

    Anonymous
    Post count: 6

    Ok, did that, and downloaded .NET, which was apparently not installed with XP.

    Now I’m getting:
    .Net Framework Initialization Error
    “Unable to find a version of the runtime to run this application.”

    when I double click on the SHUS. 😐

    Anonymous
    Post count: 6

    Fixed. Apparently I needed .NET 3.5.

    Anonymous
    Post count: 192

    I am glad you got the utility running.
    Net Framework was my suspicion as it is used for a few of my other programs and I had it installed already.

    Anonymous
    Post count: 6

    As I said, Windows is not my first language. 😆

    Anonymous
    Post count: 192

    Windows is my main language for now but may not be in the future. 🙄

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.