HOME › Forums › Gateways › EZSrve › Two timers firing at the same time

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Anonymous
    Inactive
    October 4, 2008 at 6:20 pm
    Post count: 26
    #40062

    Whenever I have two timers set to go off at the same time one of them always fails. If I make the timers all be 5 minutes apart everything runs reliably. Is not being able to have multiple timers fire at the same time a known limitation of the EZServe? If so, are there plans to fix this limitation?

    –Don

    Anonymous
    Inactive
    October 4, 2008 at 8:23 pm
    Post count: 1001
    #42243

    I have not encountered that with Timers but I have seen it with macros. Would assume it is the same issue. As a work around you can trigger a macro with the event the first Timer is causing and put a 2 second delay on the macro action. Are your Timers working with Insteon or X10?

    Anonymous
    Inactive
    October 4, 2008 at 9:59 pm
    Post count: 26
    #42244

    All devices are Insteon. All I have to do is set different times for each time triggered event and everything works fine.

    –Don

    Anonymous
    Inactive
    October 8, 2008 at 10:07 am
    Post count: 29
    #42245

    I see the same problem with timers. I have emailed support but have not heard back from them since sending in my config files.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.