Simple Home Net utility doesn’t receive responses 2007-10-03T19:03:54+00:00

HOME Forums Software SimpleHomeNet Utility Simple Home Net utility doesn’t receive responses

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Anonymous
    Post count: 1
    #39791 |

    Hi,

    I have an EZbridge, the plm, and the 2×4 input module. When I connect to EZbridge everything is fine. When I put in the module id of the 2×4, the utility tries to get data 4 times and times out. I can see valid responses coming through on the ezbridge log. It seems that the software is not responding to valid responses. Also where can I get the function codes to talk to the 2×4 manualy via xml?

    Anonymous
    Post count: 408

    Please download the new utility (v1.3) and the new EZBridge firmware (1.19). I was able to duplicate what you saw – this release should correct the problem.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.