Scene is turning ON/OFF extra devices 2014-01-05T15:42:35+00:00

HOME Forums Gateways Harmony Gateway Scene is turning ON/OFF extra devices

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • Anonymous
    Post count: 131
    #40407 |

    I have just backed up and upgraded my Harmony Gateway to the latest firmware according to the instructions. It appears to all be working correctly (so far, further testing over the next few days).

    Now that I have the updated firmware, I started to test some scenes and found some problems. I have a simple scene that turns on/off 3 devices. When using the Scene’s page (on iPhone, iPad, or web browser) I can turn ON/OFF the scene and all of the expected devices that are in the device list turn ON/OFF correctly. However, there is a forth device that is also turning ON/OFF, however it shouldn’t be because it is not defined in the list of devices.

    Below is the Scene ON/OFF information that I gathered when telnet’ing into the device while turning the scene ON/OFF for additional information. Unfortunately, I can not tell which set of commands belong to which device(s) so hopefully you can use it to help me out.

    Harmony Gateway Scene ON


    #> 203 Bytes of data Received from: 3938304
    Sending Message to the Queue.
    Packet parsed: Object: ZBP_Scenes Method: Scene_ActivateScene #Args: 1
    Scene_ActivateScene Detected!
    Inside Scene_ActivateScene.
    Scene found. Activating now...
    Activating Ins...
    === ZBP_packet::pkt_write: Sending Command: 61, Payload bytes: 3 ====
    2 61 81 11 0
    ====== ZBP_packet::pkt_write: Send packet end =========
    cmd: 61
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 61, Payload bytes: 4 ===
    81 11 0 6
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Activate complete...
    Response Mgmt::ReceiveRspUART called with cmd 61
    Response Mgmt::Asynch rsp 61 not handled.
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    81 14 db 2 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    81 13 fb 30 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    19 5 8f 23 8b cc 6b 11 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: 533e, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    15 4 47 23 8b cc e1 11 ff
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: 4ed6, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    19 5 8f 23 8b cc 61 11 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: 533e, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    18 88 47 23 8b cc 67 11 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: df42, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 58
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 58, Payload bytes: 1 ===
    6
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    14 65 63 23 8b cc 61 11 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 58
    Response Mgmt::Asynch rsp 58 not handled.
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: 440e, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    Heartbeat sent to cloud, cnt: 0

    Harmony Gateway Scene OFF


    #> 205 Bytes of data Received from: 3938304
    Sending Message to the Queue.
    Packet parsed: Object: ZBP_Scenes Method: Scene_DeactivateScene #Args: 1
    Scene_DeactivateScene Detected!
    Inside Scene_DeactivateScene.
    Scene found. Deactivating now...
    Deactivating Insteon Responders.
    === ZBP_packet::pkt_write: Sending Command: 61, Payload bytes: 3 ====
    2 61 81 13 0
    ====== ZBP_packet::pkt_write: Send packet end =========
    cmd: 61
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 61, Payload bytes: 4 ===
    81 13 0 6
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 61
    Response Mgmt::Asynch rsp 61 not handled.
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    14 db 2 23 8b cc 62 13 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: 220c, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    81 12 76 e6 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    1a a6 b6 23 8b cc 61 13 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: e5dd, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    81 13 fb 30 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    81 19 5 8f 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    18 88 47 23 8b cc 67 13 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: df42, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 58
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 58, Payload bytes: 1 ===
    6
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    cmd: 50
    pkt_read-->Insteon Message
    Response Mgmt::ReceiveRspUART called with cmd 58
    Response Mgmt::Asynch rsp 58 not handled.
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    14 65 63 23 8b cc 61 13 81
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received
    < ==== ActionMgmt::A read attribute signal arrived ====>
    < ==== ActionMgmt::A read attribute signal doesnt match with any condition in the action list ====>
    Inside Scene_Processor.
    u16DevAdd: 440e, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    Heartbeat sent to cloud, cnt: 0

    Any help in getting the scene to work correctly will be appreciated. Thanks,
    Steve

    Anonymous
    Post count: 259

    Hi Steve,

    Thanks for the telnet debug info. Based on the log I think the fourth device is responding to the Scene Group commands as if it were part of the Scene. What this tells me is that at some point it was a part of Scene_1 and then you may have deleted that scene and created another. But when you deleted the old scene, for some reason the link in that fourth device did not get deleted. I need to duplicate that and check what could have happened.

    In the meanwhile if that fourth device is not part of any other scene, then you can factory reset that device and re-add it, this will solve your problem(temporary fix). I will check and let you know. Thanks for your patience.

    Anonymous
    Post count: 131

    Thanks for your response and I should have thought of that.

    However, in the mean time I have deleted the scene and created a new one (actually did it a couple of times) but now am running into worse troubles. Now, the scene gets created but after it shows up, it no longer turns the devices ON/OFF any more. I can manually operate the devices (at the devices) and can get the HarmonyGateway UI to operate the devices from my iPad, iPhone, and/or Browser. So I know the devices are working.

    Here is the telnet results when I try to turn them ON/OFF…

    Turn Scene ON


    202 Bytes of data Received from: 4533120
    Sending Message to the Queue.
    Packet parsed: Object: ZBP_Scenes Method: Scene_ActivateScene #Args: 1
    Scene_ActivateScene Detected!
    Inside Scene_ActivateScene.
    Scene found. Activating now...
    Activating Ins...
    === ZBP_packet::pkt_write: Sending Command: 61, Payload bytes: 3 ====
    2 61 84 11 0
    ====== ZBP_packet::pkt_write: Send packet end =========
    cmd: 61
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 61, Payload bytes: 4 ===
    84 11 0 6
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 61
    Response Mgmt::Asynch rsp 61 not handled.
    Activate complete...
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 13 fb 30 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    Heartbeat sent to cloud, cnt: 0
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 14 db 2 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    19 5 8f 23 8b cc 6b 11 ff
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received


    Inside Scene_Processor.
    u16DevAdd: 533e, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 18 88 47 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 19 5 8f 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 14 65 63 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.

    Turn Scene OFF


    203 Bytes of data Received from: 4533120
    Sending Message to the Queue.
    Packet parsed: Object: ZBP_Scenes Method: Scene_DeactivateScene #Args: 1
    Scene_DeactivateScene Detected!
    Inside Scene_DeactivateScene.
    Scene found. Deactivating now...
    Deactivating Insteon Responders.
    === ZBP_packet::pkt_write: Sending Command: 61, Payload bytes: 3 ====
    2 61 84 13 0
    ====== ZBP_packet::pkt_write: Send packet end =========
    cmd: 61
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 61, Payload bytes: 4 ===
    84 13 0 6
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 61
    Response Mgmt::Asynch rsp 61 not handled.
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    14 0 5a 23 8b cc 6b 13 ff
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received


    Inside Scene_Processor.
    u16DevAdd: 21bf, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    cmd: 50
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 50, Payload bytes: 9 ===
    14 db 2 23 8b cc 67 13 84
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 50
    Response Mgmt::Node_InsCluster_Rsp received


    Inside Scene_Processor.
    u16DevAdd: 220c, u8EndPointID: cc, u16ClusterID: 0, u8Attribs: 0
    Heartbeat sent to cloud, cnt: 0
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 18 88 47 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.
    cmd: 56
    pkt_read-->Insteon Message
    ===ZBP_packet::Insteon pkt_read: Command: 56, Payload bytes: 5 ===
    84 14 65 63 2
    ===ZBP_packet::pkt_read: Packet end.===

    ZBP_packet::run: Placing response in the global response list
    Response Mgmt::ReceiveRspUART called with cmd 56
    Response Mgmt::Asynch rsp 56 not handled.

    Any ideas? I won’t make any changes until I hear back from you on your suggestions. Sorry for the extra effort. Thanks,
    Steve

    Anonymous
    Post count: 259

    Hi Steve,

    Let me look into this and I’ll get back to you. Thanks.

    Anonymous
    Post count: 131

    Hey Dhawal,
    Any thoughts on this? I would like to get the scenes working before I start working on my wizard issues.
    Thanks,
    Steve

    Anonymous
    Post count: 259

    Still testing and finding the problem. I’ll let you know soon. Is there an email we can reach you at?
    Thanks for your patience.

    Regards,
    Dhawal

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.