rPi with USB-CID 2013-03-28T18:45:45+00:00

HOME Forums Gateways Raspberry Pi rPi with USB-CID

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Anonymous
    Post count: 1
    #40360 |

    I just brought up a Raspberry Pi, Rev. B, running Debian Wheezy, build 2013-02-09.
    I’ve attached a USB-CID and followed the steps in the “How-To” section of this page:
    http://simplehomenet.com/solutions.asp?page_id=HomAidPi

    After installing zbpserver and rebooting, I am able to successfully log into the webUI using harmonygateway.com or the AIR app.
    However, when I go to query the Coordinator, the device just simply rejects the query and loops back to the previous state of the WebUI.

    I’ve confirmed this behavior with two separate USB-CIDs and rPi installations.

    Please let me know if there are more steps in the “How-To” before this should be up and running.

    Thanks!

    HarmonyPlatinum Client Version: 6.0.4 Windows 7
    Gateway Version 1.12.33 Harmony Platinum

    Anonymous
    Post count: 259

    @bauchter

    The problem seems to be with the WebApp. We have updated the fix, please clear your cache and try again.

    Regards,
    Dhawal
    @smartenit.com">dhawal.d@smartenit.com

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.