Problem with Scenes executing 2011-12-10T00:34:20+00:00

HOME Forums Gateways EZSrve Problem with Scenes executing

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • Anonymous
    Post count: 131
    #40321 |

    Recently I added two new devices (New In-Line Relay Link High Watt) as Appliance Links (since they were not in the device database yet).

    I was successful at adding the devices to EZServe and get them to turn on/off without any problems. I then went to add them to my “Holiday Scene” scene and try to turn the scene on/off. For some reason all of the other devices turn on/off as they always have been. Matter of fact, a device (house coach lights) now come on/off correctly 100% of the time since I also made it a High Watt SwitchLinc.

    Below is my telnet trace for turning off/on the new device, then turning off/on a different device, then turning off/on the scene. I am not really good at reading this so I was hoping that someone could help me out.

    Thanks,
    Steve

    Logging in…


    telnet
    telnet> open 10.0.1.8 10001
    Trying 10.0.1.8...
    Connected to EzServ.
    Escape character is '^]'.

    Welcome to SimpleHomeNet Debug Mode

    login: EZServe
    Password: **************
    Debug Mode started for EZServe

    Turn Light Off – SUCCESS


    12/09/2011 19.19.02: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 13, Cmd2 0 Ack 6
    12/09/2011 19.19.02: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 13, Cmd2 0
    12/09/2011 19.19.02: In update dev status: dev 1A.A8.B4 status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.19.02: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.02: Error Sending
    12/09/2011 19.19.06: In refresh_v.c: new update 0, old update FF
    12/09/2011 19.19.06: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.19.06: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 25, Cmd2 0
    12/09/2011 19.19.06: In update dev status: dev 1A.A8.B4 status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.19.06: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.06: Error Sending

    Turn Light On – SUCCESS


    12/09/2011 19.19.16: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 11, Cmd2 FF Ack 6
    12/09/2011 19.19.17: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 11, Cmd2 FF
    12/09/2011 19.19.17: In update dev status: dev 1A.A8.B4 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.19.17: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.17: Error Sending
    12/09/2011 19.19.20: In refresh_v.c: new update FF, old update 0
    12/09/2011 19.19.20: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.19.21: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 25, Cmd2 FF
    12/09/2011 19.19.21: In update dev status: dev 1A.A8.B4 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.19.21: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.21: Error Sending

    Turn a different light Off – SUCCESS


    12/09/2011 19.19.32: Done: MSG Code 62, ID 12.79.6D Cmd1 13, Cmd2 0 Ack 6
    12/09/2011 19.19.32: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 13, Cmd2 0
    12/09/2011 19.19.32: In update dev status: dev 12.79.6D status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.19.32: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.32: Error Sending
    12/09/2011 19.19.36: In refresh_v.c: new update 0, old update FF
    12/09/2011 19.19.36: Done: MSG Code 62, ID 12.79.6D Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.19.36: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 0, Cmd2 0
    12/09/2011 19.19.36: In update dev status: dev 12.79.6D status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.19.36: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.36: Error Sending

    Turn “same” different light On – SUCCESS


    12/09/2011 19.19.44: Done: MSG Code 62, ID 12.79.6D Cmd1 11, Cmd2 FF Ack 6
    12/09/2011 19.19.44: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 11, Cmd2 FF
    12/09/2011 19.19.44: In update dev status: dev 12.79.6D status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.19.44: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.44: Error Sending
    12/09/2011 19.19.48: Done: MSG Code 62, ID 12.79.6D Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.19.48: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 0, Cmd2 FF
    12/09/2011 19.19.48: In update dev status: dev 12.79.6D status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.19.48: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.19.48: Error Sending

    Turn Scene OFF – FAILURE (first light above didn’t turn OFF)


    12/09/2011 19.20.00: Done: MSG Code 61, ID 05.13.05 Cmd1 4D, Cmd2 67 Ack 27
    12/09/2011 19.20.00: Done: PTH_StdMsg 50, ID 19.05.8F Flag 61, Cmd1 13, Cmd2 5
    12/09/2011 19.20.00: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 61, Cmd1 13, Cmd2 5
    12/09/2011 19.20.01: Done: PTH_StdMsg 50, ID 14.2E.1B Flag 61, Cmd1 13, Cmd2 5
    12/09/2011 19.20.01: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 62, Cmd1 13, Cmd2 5
    12/09/2011 19.20.04: Done: MSG Code 56, ID 05.12.77 Cmd1 2, Cmd2 67 Ack 62
    12/09/2011 19.20.04: In plm process: all link clean up failure report rcvd
    12/09/2011 19.20.04: File: PLM.c Fn: PLM_Process - All Link Clean-Up Group Status/Failure Report - 56 N/Ack/Grp - 5
    12/09/2011 19.20.04: In update dev status: dev 05 status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.20.04: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.04: Error Sending
    12/09/2011 19.20.04: In poll scene dev: devrec 16
    12/09/2011 19.20.04: Done: MSG Code 62, ID 12.79.6D Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.04: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 0, Cmd2 0
    12/09/2011 19.20.04: In update dev status: dev 12.79.6D status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.20.04: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.04: Error Sending
    12/09/2011 19.20.04: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.04: Done: MSG Code 62, ID 12.76.E6 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.04: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 27, Cmd1 0, Cmd2 0
    12/09/2011 19.20.04: In update dev status: dev 12.76.E6 status updated cmd 0, Grp FFFFFFFF
    12/09/2011 19.20.04: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.04: Error Sending
    12/09/2011 19.20.05: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.05: Done: MSG Code 62, ID 1A.A6.B6 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.05: Done: PTH_StdMsg 50, ID 1A.A6.B6 Flag 2B, Cmd1 26, Cmd2 FF
    12/09/2011 19.20.05: In update dev status: dev 1A.A6.B6 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.05: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.05: Error Sending
    12/09/2011 19.20.05: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.05: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.05: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 25, Cmd2 FF
    12/09/2011 19.20.05: In update dev status: dev 1A.A8.B4 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.05: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.05: Error Sending
    12/09/2011 19.20.05: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.05: ezdevice.c - SaveDeviceXML: File Open Success!
    12/09/2011 19.20.06: In refresh_v.c: new update 0, old update FF
    12/09/2011 19.20.06: In refresh_v.c: new update 0, old update FF
    12/09/2011 19.20.11: ReadWriteApi.c - SaveSysVarXML: File Open Success!
    12/09/2011 19.20.11: ezaction.c - SaveActionsSysVarXML Done!

    Turn Scene ON – FAILURE (first light above didn’t turn ON)


    12/09/2011 19.20.24: Done: MSG Code 61, ID 05.11.05 Cmd1 4D, Cmd2 67 Ack 2B
    12/09/2011 19.20.25: Done: PTH_StdMsg 50, ID 19.05.8F Flag 61, Cmd1 11, Cmd2 5
    12/09/2011 19.20.25: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 61, Cmd1 11, Cmd2 5
    12/09/2011 19.20.25: Done: PTH_StdMsg 50, ID 14.2E.1B Flag 61, Cmd1 11, Cmd2 5
    12/09/2011 19.20.26: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 61, Cmd1 11, Cmd2 5
    12/09/2011 19.20.28: Done: MSG Code 56, ID 05.12.77 Cmd1 2, Cmd2 67 Ack 61
    12/09/2011 19.20.28: In plm process: all link clean up failure report rcvd
    12/09/2011 19.20.28: File: PLM.c Fn: PLM_Process - All Link Clean-Up Group Status/Failure Report - 56 N/Ack/Grp - 5
    12/09/2011 19.20.28: In update dev status: dev 05 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.28: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.28: Error Sending
    12/09/2011 19.20.28: In poll scene dev: devrec 16
    12/09/2011 19.20.28: Done: MSG Code 62, ID 12.79.6D Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.28: Done: PTH_StdMsg 50, ID 12.79.6D Flag 27, Cmd1 0, Cmd2 FF
    12/09/2011 19.20.28: In update dev status: dev 12.79.6D status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.28: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.28: Error Sending
    12/09/2011 19.20.28: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.28: Done: MSG Code 62, ID 12.76.E6 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.29: Done: PTH_StdMsg 50, ID 12.76.E6 Flag 27, Cmd1 0, Cmd2 FF
    12/09/2011 19.20.29: In update dev status: dev 12.76.E6 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.29: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.29: Error Sending
    12/09/2011 19.20.29: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.29: Done: MSG Code 62, ID 1A.A6.B6 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.29: Done: PTH_StdMsg 50, ID 1A.A6.B6 Flag 2B, Cmd1 26, Cmd2 FF
    12/09/2011 19.20.29: In update dev status: dev 1A.A6.B6 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.29: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.29: Error Sending
    12/09/2011 19.20.29: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.29: Done: MSG Code 62, ID 1A.A8.B4 Cmd1 19, Cmd2 0 Ack 6
    12/09/2011 19.20.30: Done: PTH_StdMsg 50, ID 1A.A8.B4 Flag 2B, Cmd1 25, Cmd2 FF
    12/09/2011 19.20.30: In update dev status: dev 1A.A8.B4 status updated cmd FF, Grp FFFFFFFF
    12/09/2011 19.20.30: In form cluster rep insstd: tot attr 1, cid 0
    12/09/2011 19.20.30: Error Sending
    12/09/2011 19.20.30: In poll scene dev: send command to next device or resend to prev dev
    12/09/2011 19.20.30: ezdevice.c - SaveDeviceXML: File Open Success!
    12/09/2011 19.20.31: In refresh_v.c: new update FF, old update 0
    12/09/2011 19.20.31: In refresh_v.c: new update FF, old update 0
    12/09/2011 19.20.36: ReadWriteApi.c - SaveSysVarXML: File Open Success!
    12/09/2011 19.20.36: ezaction.c - SaveActionsSysVarXML Done!
    Anonymous
    Post count: 1001

    There is no indication 1A.A8.B4 received the Scene On or Off sequence. Since the device can be turned On/Off it would not look like a powerline communication problem. This leaves an issue with the link records in the EZSrve or the In-Line Linc related to Unit (Group) 5. Do you have the SHN Utility installed where the link records in the In-Line Linc can be displayed?

    Anonymous
    Post count: 131

    Yes I have access tithe shn utility but what commands do I need to enter to get the link records you are asking for?

    Thanks,
    Steve

    Anonymous
    Post count: 131

    Here is the link record for the In-Line Link. I can’t figure out how to get just group 5 from the EZServe, can you please tell me how to do that?








    also, here is the link record for a device in group 5 that is working correctly (and is relatively simple, others have 5 or more links in them).









    Thanks,
    Steve

    Anonymous
    Post count: 1001

    The EZSrve cannot be used as the SHN Utility interface to look at its own link records.

    The link record in the In-Line Linc looks okay except for the Ramp Rate (LD2) which is set for 9 minutes. If this is a Dimmer rather than a Relay it would look like it is not responding to the Scene but actually responding very slowly.

    Just to double check 06.4D.67 is the EZSrve address.

    Could set the LD2 value to 1F just in case the Relay requires a positive Ramp Rate. I’ve not seen a Relay device need this but these are new devices.

    If you have a spare KPL button that is not being used try a Set button link between a KPL button and the InLine Linc. If this works display the link records again and see what the InLine Linc generated for a link record itself.

    Anonymous
    Post count: 131

    Here is the Link Records after I added it to the Keypad Link’s extra button









    What is interesting is that after adding it to the record that the original LD changed. Should that have happened?

    Thanks,
    Steve

    Anonymous
    Post count: 1001

    I have never seen a device change a link record like that.

    Two things about the KeypadLinc link record. The LD1 On Level is 00 which would indicate the InLine Linc was Off when linked. The newer devices are taking the current state of the device for the On command condition which means the KPL button may not turn the InLine LInc On because it was Off when linked. The other thing is the InLineLinc is using LD3=1 rather the usual LD3=0 for the output unit number. The LD3 in the EZSrve responder link (rec 1) may have to be set to 1 rather than 0.

    Anonymous
    Post count: 131

    LD3=1 did it.

    I don’t know what that does, can you help me understand it?

    Thanks so much for your help.

    Anonymous
    Post count: 1001

    LD3 is the Output Unit number of the Responder output section. It specifies which Output Unit of the device should react as a Responder to the link record. For the vast majority of Insteon devices the first or only Output Unit number has always been 00 (for years). The KeypadLinc is one exception in that button Output Unit numbers run from 1-8 (rather than 0-7). This is the only single output Insteon device I am aware of that is using an Output Unit number of 01.

    Anonymous
    Post count: 1001

    I checked the link records in one of my InLine Lincs and they have 00 in the LD3 position for all the responder link records. Clearly something has changed with the InLineLinc you are using. Is this a relatively new purchase?

    Anonymous
    Post count: 131

    Yes it is a new purchase and was just released from smarthome in the last few weeks. It is like most InLine modules with the exception of it being High Wattage. I have been waiting for these to replace the more expensive High Watt SwitchLincs and was really happy with it until it wouldn’t work with EZServe. But now I know. These kind of changes definitely make it harder to work with the the products but with fantastic help from you this is still so much better than my old setup (X10).

    Thanks Grif… I hope you know how much help you have been to me over the years. Have a great holiday.
    Steve

    Anonymous
    Post count: 1001

    My pleasure Steve! Happy holidays.

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.