power fail + loss of network + timers… 2008-06-08T03:11:46+00:00

HOME Forums Gateways EZSrve power fail + loss of network + timers…

Viewing 1 post (of 1 total)
  • Author
  • chejlava
    Post count: 57
    #39968 |


    Been happily running 1.42 for quite a while now and just ran into something that you can tag for a future fix (i.e. not pressing at all..)

    We had some power blinks in the windy weather we had over the last week that reset the EZServe and confused the cable modem. (i.e. no network when EZServe came up). However, EZServe happily ran timers using the clock that looks like it starts at midnight with no external input.

    After a hard reset, don’t run timers until something sets the clock.

    Secondary issue – I then set the clock manually, but you can’t manually set sunrise/sunset time, which had glitched to 1:04 for sunset and for sunrise. I remember the sunset time because all of my sunset related timers came on around 1AM.

    Allow manual sunrise/sunset times if time is set manually.

    I’ll be downloading and applying 1.50 now that I see it.

    Keep up the great work!

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.