AnonymousJanuary 29, 2014 at 3:32 amPost count: 28
Once again thanks to this forums support
I’m looking forward to the Updates for iSmartenit
Two more points of interest Insteon motion sensor and GPIO with the Raspberry Pi
is there a ETA for the next update?
ThanksAnonymousJanuary 30, 2014 at 7:59 pmPost count: 259
The Insteon Motion Sensor needs to be added to the iSmartenit App. We will try to include that in the next release of the App which will be about the end of next week.
Which GPIO are you asking about the Smartenit EZIO line of products?AnonymousJanuary 30, 2014 at 9:02 pmPost count: 28
I’m asking about the Raspberry Pi on board GPIO
thanks for the response
looking forward to the updateAnonymousJanuary 30, 2014 at 9:05 pmPost count: 259
We do not have any plans to support that. Will let you know if that changes. Thanks.AnonymousFebruary 18, 2014 at 8:24 pmPost count: 28
Any update on the next release of the App ?
ThanksAnonymousFebruary 18, 2014 at 8:44 pmPost count: 259
We have some changes being tested internally. It might take a week or so if everything goes good to release the next update.AnonymousFebruary 19, 2014 at 1:46 amPost count: 28
Thanks looking forward to itAnonymousFebruary 28, 2014 at 3:35 pmPost count: 28
We have some changes being tested internally. It might take a week or so if everything goes good to release the next update.
Is there any news on this update.
ThanksAnonymousFebruary 28, 2014 at 5:18 pmPost count: 259
The WebApp, Desktop App and the Android App should be done hopefully early next week. The iOS App can be another 1 week.AnonymousMarch 6, 2014 at 5:24 pmPost count: 11
would this also include support for the 4 or 8 scene mini-remotes by chance? I’m looking forward to using my motion detector!AnonymousMarch 7, 2014 at 12:15 amPost count: 259
Yes the support for 4/8 scene mini-remotes has been added. You will be able to make them controllers of the Scenes you create from the App. In addition to Insteon, you will be able to control Zigbee and X10 devices with these remotes.
- You must be logged in to reply to this topic.