EZServe enhancement 2009-09-17T00:56:29+00:00

HOME Forums General Product Ideas EZServe enhancement

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Anonymous
    Post count: 9
    #40214 |

    It would be great in future versions to be able to schedule via a timer the ability to perform regular restarts on the EZServe. I use this product to control a summer home and since v2.0 the reliability has decreased. v1.6 was very stable but v2.0 seems to hang after a period of time and I loose all connectivity and have to go to the summer home to power cycle the unit to return it to useability. If I could schedule a regular recycle and it would work, it would save me a 3 hr drive. I also have a webcam at the same residence and have reliable service, so I know it is not the broadband service , router or cable modem.

    Anonymous
    Post count: 1001

    Depending on the state of the EZSrve you may be able to access it through the V2 API port 8002. Using the SHN Utility, EZBridge/EZServe Control tab issue the following V2 xml command to test access while things are working …..

    GetRevision

    This will return and display the current revision number.

    If the V2 API is accessible you can issue the following …..

    Restart

    to initiate an EZSrve Restart. This may not work, depends on the nature of the original problem. This does Restart EZSrve on a working unit.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.