Ezflora small problem 2011-06-22T01:20:11+00:00

HOME Forums Irrigation EZFlora Ezflora small problem

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Anonymous
    Post count: 1
    #40306 |

    I have a Ezflora that I am using with insteon smartlinc. I used the direct command method so I can control each valve seperatly. All is working ok except in mobilinc and the insteon smartlinc page all my valve status show as “on” all the time. I can hit on for a particular valve and it goes on, aswell I hit off and the valve goes off, just always shows as on. I checked my direct code entries, and tried reset but no change. Any help or experience with this would be much appriecated.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.