HOME Forums Controllers EZSnsRF any conflict w/existing Dakota receivers?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • Anonymous
    Post count: 8

    Will EZSnsRF and an existing Dakota receiver both successfully receive the same signal from the same transmitter?

    I already have a Dakota receiver and I just want to make sure that adding the EZSnsRF doesn’t preclude the use of the standard Dakota receiver. I’d like the standard receiver to make its normal chime sound AND have EZSnsRF do its thing. If the transmitters simply broadcast to anyone & everyone listening then everything should be fine. Before purchasing, I just want to make sure each transmitter doesn’t “pair” with only one receiver or do anything else that would preclude using two receivers (one Dakokta and one EZSnsRF) concurrently.

    Post count: 146


    Thank you for your question.

    There will be no conflict with existing Dakota receivers. You’re able to have multiple Dakota receivers just as you’re able to have an EZSnsRF receive the signal from the Dakota Alert sensors.


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.