Access to IP cam 2014-03-08T03:54:39+00:00

HOME Forums General Product Ideas Access to IP cam

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Anonymous
    Post count: 28
    #40421 |

    Is there a way for the Public IP Address and Private IP Address to be combined in the settings of IP CAms so one setup will work both at home and away? Currently to view the same camera from both locations i have to setup the camera twice. This seems to work in this fashion for the rest of the program but not for the cameras.

    Anonymous
    Post count: 259

    Hi Lynn,

    As of now the IP camera stream is directly accessed by the App. So if can just put in your public ip and do port forwarding for the appropriate port, then it should work.

    Anonymous
    Post count: 28

    I all ready use public ip and do port forwarding for the appropriate port. This is working fine but my public ip is not static, so when it changes i have to look up the new ip in the app and copy and past it to the camera settings. It just seems if the app already knows my new ip that it would be nice if it would use it.
    thanks for the support

    Anonymous
    Post count: 259

    Hi Lynn,

    You can keep track of the public ip using a dynamic DNS service like http://www.noip.com/

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.