Reply To: [SOLVED] Devices respond when manually addressed 2017-12-21T17:35:02+00:00

HOME Forums Gateways Harmony Gateway [SOLVED] Devices respond when manually addressed Reply To: [SOLVED] Devices respond when manually addressed

Anonymous
Post count: 7

Ok – finally found some time to get back to this….

All X10 devices on the network have unique IDs.
All X10 devices can be turned on/off from either my Palm Pad remote (via the wireless transceiver), or the App (on my Android tablet or harmonygateway.com).
None of the Wizards I have created work consistently.

I have 2 right now that read:
When Fan is Off, every 2 minutes, every day
Then Turn on Fan

With a 2nd Wizard doing exactly the opposite
When Fan is On, every 2 minutes, every day
Then Turn off Fan

They were started 1 minutes apart (on at Even minutes, off at Odd minutes)

I have an XTBM signal monitor device on the circuit with the Harmony, and no X10 messages are being sent. None. Only when I do it manually from the app or remote.

It seems the wizards are getting stored, at least somewhere – because when I switch apps from windows to android, the Wizards and devices are all there.