Reply To: Flash lights when doorbell is rung 2017-12-21T11:23:13+00:00

HOME Forums Gateways EZSrve Flash lights when doorbell is rung Reply To: Flash lights when doorbell is rung

Anonymous
Post count: 192

I didn’t buy it as the kit but have used the I/OLinc and one section of the ELK-930. For door bell detection.

When the bell is ringing the I/OLinc will send an On to what ever is linked to it and an Off when the bell stops ringing. I also added an X10 address to mine and it sounded an X10 Chime Module.

So depending on how long the bell is rung. You will get a short On then Off Insteon command.
Anything like a On Off Flashing would probably have to be done with a controller.