OK, I hooked up from computer serial port to isy serial. Using utility program it connected, no problem. Then when I went to the ezflora tab and tried to set zone 8 to pump, entered the inseton id and tried to read, it timed out with four attempts then gave me an insteon message timeout error. In isy, i can see the ezflora and can turn valves on/off. I then tried rebooting isy and trying the same thing, but then got Unexpected inbound message type. 2 7D FF 00….. several times then the inseton message timeout error again. not sure what I’m doing wrong.? configuration of isy wiring is: network connected, serial b connected to computer, port a to smartlinc 2412N connected and powered up.
Reply To: How to Set V8 to Pump 2017-12-22T00:58:02+00:00