HOME › Forums › Input/Output › EZIOxx › linking ouputs R1 & R2 › Reply To: linking ouputs R1 & R2
Inactive
March 4, 2011 at 4:12 pm
Post count: 1001
Bob
Those link records should work.
FYI
the LD1/2/3 fields in the PLM Controller records are not used by the PLM and are often set to 00 00 00.
Group number 00 is not normally used. I suggest Group numbers in the 1-254 range. Some Insteon hardware uses Group 255 for special All On/Off so stay away from that number as well.
Lee