Reply To: Can’t connect to device 2017-12-21T14:52:44+00:00

HOME Forums Software SimpleHomeNet Utility Can’t connect to device Reply To: Can’t connect to device

Anonymous
Post count: 82

In answer to your questions:

On an actual XP system there will be a Blue T shaped Icon in the system tray representing SDM3. Double click on this Icon to open the SDM3 window. What messages are being displayed in the SDM3 window?

downloadTimer started
timerActivate enabled
SDM:DM=active,1.01.138.308,1/10/2011 12:17:21 PM,responded,05.FD.DD,2.13,xdevices=False
starttime=00:10
UI:ConnectedAndReady
si:00 00 00 08 9B 59 0F 28 00
PLC:ERROR=012:MapNotLoaded-PLC not connected or no valid map. Try using isResponding first.
PLC:sendinsteonraw=True
si:00 00 00 08 9B 59 0F 28 00
PLC:ERROR=012:MapNotLoaded-PLC not connected or no valid map. Try using isResponding first.
PLC:sendinsteonraw=True
si:00 00 00 08 9B 59 0F 28 00
PLC:ERROR=012:MapNotLoaded-PLC not connected or no valid map. Try using isResponding first.
PLC:sendinsteonraw=True
si:00 00 00 08 9B 59 0F 28 00
PLC:ERROR=012:MapNotLoaded-PLC not connected or no valid map. Try using isResponding first.
PLC:sendinsteonraw=True
ui:sendHardReset
PLC:sendhardreset=False
uifinished:sendHardReset

Also in the SHN Utility under Insteon Traffic what messages are being displayed when you enter the Insteon address in the EZX10RF tab. Also is 05.FD.FD the actual address of the PLC?

1 To ID:08.9B.59 flags:3 cmd1:28 cmd2:0
2 To ID:08.9B.59 flags:0F cmd1:28 cmd2:0
3 To ID:08.9B.59 flags: cmd1:28 cmd2:0
4 To ID:08.9B.59 flags: cmd1:28 cmd2:0
5 To ID:08.9B.59 flags: cmd1:28 cmd2:0

thanks,

bob