HOME › Forums › Gateways › EZSrve › Updated to 2.06, PLM stopped responding › Reply To: Updated to 2.06, PLM stopped responding
Inactive
November 28, 2010 at 6:48 pm
Post count: 6
UPDATE: I had a newer PLM available (firmware 52), and substiting this for my older PLM solved the issue.
I strongly suggest adding a note to the readme for the 2.x firmware which indicates that it may be necessary to replace your PLM if it is an older model. Had I not had a newer PLM on hand, I would have been SOL.
Thanks,
Tim