HOME › Forums › Input/Output › EZIOxx › How do I set EXIO6I Analog Inputs to 0? › Reply To: How do I set EXIO6I Analog Inputs to 0?
Inactive
September 12, 2010 at 3:42 pm
Post count: 1001
Bob,
If you have access to a Windows OS and can connect the PLM to a port on that system I would recommend installing the SimpleHomeNet Utility Suite (free download software) to verify the EZIO6I configuration before ordering the firmware update. Also if you have a meter check the voltage between GND and +12V to get a reference measurement. Then measure between AN1 to +12V and AN2 to +12V to confirm the same reference voltage on both analog terminals.
Lee