Reply To: How do I set EXIO6I Analog Inputs to 0? 2017-12-21T22:32:18+00:00

HOME Forums Input/Output EZIOxx How do I set EXIO6I Analog Inputs to 0? Reply To: How do I set EXIO6I Analog Inputs to 0?

Anonymous
Post count: 1001

Using V28 revision EZIO6I with Input 5 & 6 connected to GND with both sets of Analog Trip Points set to 0, I have no Broadcast messages when Enable Analog Inputs is Off (configuration register set to 40). When I turn on Enable Analog Inputs (configuration register set to 41) I have continuous Broadcast messages because both Analog Trip points are 0. The Broadcast messages continue until I write a 40 back into the configuration register. The following is the raw PLM messages generated during the test.

1 :9 0262 01DBB6 034E00 06
1 :11 0250 01DBB6 13AC99 2B4E40
1 from ID:01.DB.B6 flags:2B cmd1:4E cmd2:40 READ OF CONFIGURATION REGISTER – VALUE 40
2 :9 0262 01DBB6 034D41 06
2 :11 0250 01DBB6 13AC99 2B4D41
2 from ID:01.DB.B6 flags:2B cmd1:4D cmd2:41 WRITE OF CONFIGURATION REGISTER TO 41
2 :11 0250 01DBB6 070701 8B2750
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:50 BROADCAST MESSAGES WHEN CONFIGURATION REGISTER CHANGED
2 :11 0250 01DBB6 070701 8B2770
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:70
2 :11 0250 01DBB6 070701 8B2760
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:60
2 :11 0250 01DBB6 070701 8B2740
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:40
2 :11 0250 01DBB6 070701 8B2750
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:50
2 :11 0250 01DBB6 070701 8B2770
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:70
2 :11 0250 01DBB6 070701 8B2760
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:60
2 :11 0250 01DBB6 070701 8B2740
2 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:40
3 :11 0250 01DBB6 070701 8B2750
3 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:50
3 from ID:01.DB.B6 flags:8B cmd1:4D cmd2:50
3 :11 0250 01DBB6 070701 8B2770
3 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:70
3 from ID:01.DB.B6 flags:8B cmd1:4D cmd2:70
3 :11 0250 01DBB6 070701 8B2760
3 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:60
3 from ID:01.DB.B6 flags:8B cmd1:4D cmd2:60
3 :9 0262 01DBB6 034D40 06
3 :11 0250 01DBB6 13AC99 2B4D40
3 from ID:01.DB.B6 flags:2B cmd1:4D cmd2:40 BROADCASE MESSAGES CONTINUE UNTIL CONFIGURATION REGISTER CHANGED BACK TO 40
3 :11 0250 01DBB6 070701 8B2770
3 from ID:01.DB.B6 flags:8B cmd1:27 cmd2:70