Reply To: EZeye & EZIO6I 2017-12-21T22:29:31+00:00

HOME Forums Input/Output EZIOxx EZeye & EZIO6I Reply To: EZeye & EZIO6I

Anonymous
Post count: 1001

Bob,

Don’t the following trace messages indicate you are getting Group commands from Input 1 and Input 5? This indicates to me that you were successful in linking Input 1 and Input 5. Something that may have been introducing some question about what is going on. The “Input Port” bits for Input 1 and Input 5 will change as the respective Input changes state. This is true whether Broadcast messages are being generated which returns the Input Port byte, Group messages are being generated, or NO messages are being generated. The Input Port bits changing is an internal action of EZIOxx devices as Inputs are changing state regardless of what message is generated, if any. If you had the SHN Utility running you can query the Input Port byte value as you change Input states and watch the bits turn On and Off. The Input Port byte is reflecting the physical state of the Input, not whether that state change is generating any message (Broadcast or Group).

Jul-10 11:46:19 PM
Received INSTEON “EZIO6I” off (button 1)
Received INSTEON “EZIO6I” off (button 5)
Received INSTEON “EZIO6I” on (button 1)
Received INSTEON “EZIO6I” on (button 5)
Received INSTEON “EZIO6I” off (button 1)
Received INSTEON “EZIO6I” off (button 5)
Received INSTEON “EZIO6I” on (button 1)
Received INSTEON “EZIO6I” on (button 5)