Bob, I set up my EZIO6I with an EZEye on digital Input 1 and Analog 1 (Input 5). Both Inputs report state change when the Enable Analog Inputs option in On and the Analog 1 trip points are set. I am using the UDI ISY device so my test environment is not using the software package you are using.
Are the Inputs linked to the Indigo PLM or are you using the Broadcast Status Chg option to report state changes. Also if using the Broadcast Status Chg option when not using Analog 1 in Analog mode, when the Enable Analog Inputs option is set is the Broadcast Status Chg option also being set.