HOME › Forums › Gateways › EZSrve › Translate X10 command to Insteon › Reply To: Translate X10 command to Insteon

Anonymous
Inactive
April 13, 2010 at 9:28 pm
Post count: 39
#43351

Thanks…. tried your suggestions and light failed to activate. I have setup device as: NAME – x10c1 ID C01 TYPE x10 … under my conditions as shown in “2.0 Operation” I have used “Attribute = Status”… there is the possibility of using “x10 control option” which I did not use.

Anything else I should try?

thanks again