Reply To: Translate X10 command to Insteon 2017-12-22T04:12:49+00:00

HOME Forums Gateways EZSrve Translate X10 command to Insteon Reply To: Translate X10 command to Insteon

Post count: 1001

Take a look at page 2 of Topics under EZSrve category. The Topic “2.0 Operation”, about the 7th post in this topic has screen captures of an Action definition AX10B16On. This Action triggers from an X10 On from B16. Simply substitute the device name for the X10 device you want to trigger on. The Effect turns on an Insteon device DICONSwitchTest. Change the device name to whatever Insteon device you want to turn On. You will need a second Action that triggers from the same X10 device but the Status value will be 03 (X10 Off command) rather than the 02 (X10 On command) in the example. The Effect for the second Action will have a Status value of 00 (Insteon Off) rather than the FF (Insteon On) value in the example.