HOME › Forums › Gateways › EZSrve › Actions/Timers trigger (sometimes) appropriately › Reply To: Actions/Timers trigger (sometimes) appropriately
Anonymous
March 11, 2010 at 11:33 pm
Post count: 131
Well… Unfortunately it did not work as expected.
I upgraded to the 02.06.04 as you suggested and waited the two days. Unfortunately, last night nothing happened. So tonight I setup the telnet as you suggested and the results below show that nothing happened at the right time.
Basically, at 18:15 you should have seen the lights go on. However, between the telnet sesssion start and the 18.26 there is nothing. I pressed the “Night Time” scene button on the Insteon controller just to provide some feedback into the telnet log and show that everything on the EZServe controller was working correctly. Basically, the Insteon scene turned on the outside lights, the indoor outlet, and let the EZServe know that the button was pushed. Then EZServe’s action (same one that should control it at 18:15) triggered the X10 device to turn on as well.
Unfortunately, this shows that EZServe works when manually told to do so, but that the timer is not working past the first execution after a reboot.
Any suggestions?
Steve
Trying W.X.Y.Z...
Connected to EZServe.
Escape character is '^]'.
Welcome to SimpleHomeNet Debug Mode
login: EZServe
Password: *************
Debug Mode started for EZServe
03/11/2010 18.26.42: Done: PTH_StdMsg 50, ID 12.C4.86 Flag CB, Cmd1 11, Cmd2 0
03/11/2010 18.26.42: All link broadcast msg rcvd:Grp 6, Cmd 11
03/11/2010 18.26.42: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 41, Cmd1 11, Cmd2 6
03/11/2010 18.26.42: In all link cleanup msg rcvd 12.C4.86, cmd 11, grpno 06
03/11/2010 18.26.42: In update dev status: dev 12.C4.86 status updated cmd 11, Grp 6
03/11/2010 18.26.42: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.42: Error Sending
03/11/2010 18.26.42: In ActivatePostActn: Action Night Time ON,Post actn status 0
03/11/2010 18.26.42: Start polling of devices if requd
03/11/2010 18.26.42: In poll scene dev: devrec 23
03/11/2010 18.26.42: Done: MSG Code 62, ID 14.66.29 Cmd1 19, Cmd2 0 Ack 6
03/11/2010 18.26.42: In process actions: Activate effect
03/11/2010 18.26.43: In process actions: Effect to process and action Night Time ON
03/11/2010 18.26.43: In form cluster actor queue: attr name Status, attr value 0x02
03/11/2010 18.26.43: Form clustr: CB-0: [3] CB-I: [41] CB-II: [4] CB-III: [0] CB-IV: [80] CB-V: [2] CB-VI: [0] CB-VII: [0] CB-VIII: [0] CB-IX: [0]
03/11/2010 18.26.43: In process actions: Effect to process and action Night Time ON
03/11/2010 18.26.43: In form cluster actor queue: attr name Status, attr value 0xFF
03/11/2010 18.26.43: Done: PTH_StdMsg 50, ID 14.66.29 Flag 2B, Cmd1 76, Cmd2 FF
03/11/2010 18.26.43: In update dev status: dev 14.66.29 status updated cmd FF, Grp FFFFFFFF
03/11/2010 18.26.43: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.43: Error Sending
03/11/2010 18.26.43: In poll scene dev: send command to next device or resend to prev dev
03/11/2010 18.26.43: ezdevice.c - SaveDeviceXML: File Open Success!
03/11/2010 18.26.45: In refresh_v.c: new update 11, old update 0
03/11/2010 18.26.45: In refresh_v.c: new update FF, old update 0
03/11/2010 18.26.45: ReadWriteApi.c - SaveSysVarXML: File Open Success!
03/11/2010 18.26.45: ezaction.c - SaveActionsSysVarXML Done!
03/11/2010 18.26.46: Form clustr: CB-0: [4] CB-I: [8] CB-II: [0] CB-III: [0] CB-IV: [61] CB-V: [FF] CB-VI: [0] CB-VII: [0] CB-VIII: [0] CB-IX: [0]
03/11/2010 18.26.46: In actor requst process: actor queue ActorArray0 3,ActorArray4 80,ActorArray5 2
03/11/2010 18.26.46: Done: MSG Code 63, ID 6A.00.06 Cmd1 4D, Cmd2 67 Ack 2B
03/11/2010 18.26.46: In actor resp processor: cluster api in progress for ID[6A.00.06], RespArray9[0], RespArray10[0]
03/11/2010 18.26.46: Done: MSG Code 63, ID 62.80.06 Cmd1 4D, Cmd2 67 Ack 2B
03/11/2010 18.26.46: In update dev status: dev A04 status updated cmd 2, Grp FFFFFFFF
03/11/2010 18.26.46: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.46: Error Sending
03/11/2010 18.26.46: In actor resp processor: cluster api in progress for ID[62.80.06], RespArray9[0], RespArray10[0]
03/11/2010 18.26.46: Fn Get_ClusterAction: Case X10 Arg1[80], Arg2[2]
03/11/2010 18.26.46: In update cluster ram insstd: attr 0 value 2
03/11/2010 18.26.47: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.47: Error Sending
03/11/2010 18.26.47: In actor requst process: actor queue ActorArray0 4,ActorArray4 61,ActorArray5 ff
03/11/2010 18.26.47: In plm msg handler: Ins grp 0x8, Grpcmd 0x11
03/11/2010 18.26.47: Done: MSG Code 61, ID 08.11.08 Cmd1 4D, Cmd2 67 Ack 2B
03/11/2010 18.26.47: In actor resp processor: cluster api in progress for ID[08.11.08], RespArray9[0], RespArray10[0]
03/11/2010 18.26.47: In get cluster action: CID 0, attrnum 0
03/11/2010 18.26.47: In update cluster ram insstd: attr 0 value FF
03/11/2010 18.26.47: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.47: Error Sending
03/11/2010 18.26.48: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 61, Cmd1 11, Cmd2 8
03/11/2010 18.26.48: Done: MSG Code 58, ID 06.C4.86 Cmd1 4D, Cmd2 67 Ack 61
03/11/2010 18.26.48: File: PLM.c Fn: PLM_Process - All Link Clean-Up Group Status/Failure Report - 58 N/Ack/Grp - 6
03/11/2010 18.26.48: In update dev status: dev 08 status updated cmd FF, Grp FFFFFFFF
03/11/2010 18.26.48: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.48: Error Sending
03/11/2010 18.26.48: In poll scene dev: devrec 18
03/11/2010 18.26.48: Done: PTH_StdMsg 50, ID 14.66.29 Flag 61, Cmd1 11, Cmd2 8
03/11/2010 18.26.48: Done: MSG Code 62, ID 12.C4.86 Cmd1 19, Cmd2 0 Ack 6
03/11/2010 18.26.48: Done: PTH_StdMsg 50, ID 12.C4.86 Flag 2B, Cmd1 B2, Cmd2 CC
03/11/2010 18.26.48: In update dev status: dev 12.C4.86 status updated cmd CC, Grp FFFFFFFF
03/11/2010 18.26.48: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.48: Error Sending
03/11/2010 18.26.48: In poll scene dev: send command to next device or resend to prev dev
03/11/2010 18.26.48: Done: MSG Code 62, ID 14.66.29 Cmd1 19, Cmd2 0 Ack 6
03/11/2010 18.26.49: Done: PTH_StdMsg 50, ID 14.66.29 Flag 2B, Cmd1 76, Cmd2 FF
03/11/2010 18.26.49: In update dev status: dev 14.66.29 status updated cmd FF, Grp FFFFFFFF
03/11/2010 18.26.49: In form cluster rep insstd: tot attr 1, cid 0
03/11/2010 18.26.49: Error Sending
03/11/2010 18.26.49: In poll scene dev: send command to next device or resend to prev dev
03/11/2010 18.26.49: ezdevice.c - SaveDeviceXML: File Open Success!
03/11/2010 18.26.50: ReadWriteApi.c - SaveSysVarXML: File Open Success!
03/11/2010 18.26.50: ezaction.c - SaveActionsSysVarXML Done!
03/11/2010 18.26.50: In refresh_v.c: new update 2, old update 3
03/11/2010 18.26.50: In refresh_v.c: new update CC, old update 11
03/11/2010 18.26.50: In refresh_v.c: new update FF, old update 0