Reply To: Using EZIO8SA digital input events as conditions 2018-01-12T10:33:11+00:00

HOME Forums Gateways EZSrve Using EZIO8SA digital input events as conditions Reply To: Using EZIO8SA digital input events as conditions

Anonymous
Post count: 1001

At the EZSrve Device Management screen click on the Scenes Icon. Select “Create New Scene”, enter a Scene name, under Controllers select the EZIO8SA and set Unit number to the Group number for the Input you want to use (Group 1 for Input 1, Group 2 for Input 2, etc). Click ADD under Controllers to add the EZIO8SA to the list of controllers. Under Responders, select EZServe, set LD1 to 100%, LD2 to 0.1 second and LD3 to 00. Click on ADD under Responders to add EZServe to the list of responders. Click SAVE to create the Scene. This may take a few minutes depending on the number of links which already exist in the EZServe and the EZIO8SA.

Run the SHN Utility EZIOxx tab to set Input 1 to Group 1 and/or whatever Inputs you plan on using. Be sure to click on WRITE to save the each input that you set the Group value.

Once the Scene has been established and the SHN Utility has been used to set the Group number for the Input you want to use, you can now create an Action that triggers on the Input state change On or Off.